發布時間：2018-10-11 13:05

【摘要】：采用Midas Gen有限元分析軟件對某無軸式摩天輪的施工過程進行仿真模擬計算,對工程進行工況劃分,并應用對各工況"激活""鈍化"的方法分析關鍵桿件的應力狀態,對施工過程進行計算分析。為保證施工安全,為關鍵桿件制定專項監測方案,在安裝、卸載過程中對它們進行應力監測,并將模擬計算的應力值與現場監測數據對比。對比結果表明:模擬計算的應力值與現場監測數據吻合,施工方法合理,施工過程安全可靠。
[Abstract]:The Midas Gen finite element analysis software is used to simulate and calculate the construction process of a certain shaftless Ferris wheel. The working conditions of the project are divided, and the stress state of the key member is analyzed by using the method of "activation" and "passivation" for each working condition. The construction process is calculated and analyzed. In order to ensure the safety of construction, a special monitoring scheme is made for the key members. The stress is monitored during installation and unloading, and the stress values calculated by simulation are compared with the field monitoring data. The results show that the stress calculated by the simulation is in agreement with the field monitoring data, the construction method is reasonable and the construction process is safe and reliable.
【作者單位】： 中國建筑第六工程局有限公司;河北工業大學土木與交通學院;
【分類號】：U445.4;TS952.81
，

本文編號：2264297