本文選題：工業無線技術 + WIA-PA　； 參考：《華東理工大學》2014年碩士論文

【摘要】：工業無線技術是在無線傳感器網絡的基礎上,專門用于工業環境的無線通信技術。通信具有抗干擾能力強、超低功耗、實時通信、易擴展等優勢,能夠滿足工廠自動化檢測、控制一些環境惡劣、布線困難、高腐蝕高污染等場合的過程參數和設備狀態。WIA-PA技術是具有我國自主知識產權的工業無線技術,目前適用于工業現場的WIA-PA無線產品相對較少,此類產品的市場潛力巨大。 本文重點研究了WIA-PA技術,開發了符合WIA-PA通信協議的智能全輸入無線溫度變送器。儀表模塊以低功耗MSP430單片機為核心處理單元,模數轉換采用AD7794芯片,傳感器輸入通道通過雙四選一開關CD4052選擇,儀表模塊設置異步串行方式與通信模塊交換數據,變送器采用電池供電。軟件編程將常規儀表狀態設為休眠模式,通過定時器中斷,儀表每10秒被喚醒一次進行AD采樣、數據轉換和處理,然后按照WIA-PA協議要求通過無線模塊發送給網關。 無線溫度變送器可以與DCS系統中的分散處理單元正常通信,且功耗極低。儀表在支持的標準信號輸入下,精度均符合設計要求。
[Abstract]:Industrial wireless technology is a wireless communication technology which is specially used in industrial environment on the basis of wireless sensor network. Communication has the advantages of strong anti-interference ability, ultra-low power consumption, real-time communication, easy to expand and so on. It can meet the needs of factory automation inspection, control some harsh environment, and make wiring difficult. WIA-PA technology is an industrial wireless technology with independent intellectual property rights in China. At present, there are relatively few WIA-PA wireless products suitable for industrial site, and the market potential of such products is huge. This paper focuses on WIA-PA technology and develops an intelligent full input wireless temperature transmitter in accordance with WIA-PA protocol. The instrument module takes low-power MSP430 microcontroller as the core processing unit, A / D conversion adopts AD7794 chip, the sensor input channel is selected by double four-switch CD4052, and the instrument module sets up asynchronous serial mode to exchange data with communication module. The transmitter is powered by batteries. The routine instrument state is set to sleep mode by software programming. The instrument is awakened every 10 seconds for AD sampling, data conversion and processing, and then sent to the gateway through wireless module according to WIA-PA protocol. The wireless temperature transmitter can communicate normally with the distributed processing unit in DCS system, and the power consumption is very low. The precision of the instrument meets the design requirements under the input of the supported standard signal.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP212

【參考文獻】

相關期刊論文 前10條

1 萬軍;王洪元;車軒;王天成;;基于WIA-PA的新型無線溫度變送器設計[J];工業儀表與自動化裝置;2012年03期

2 李建中;高宏;;無線傳感器網絡的研究進展[J];計算機研究與發展;2008年01期

3 楊淼;梁煒;徐偉杰;;基于WIA-PA的工業無線網絡網關設備[J];計算機工程;2010年23期

4 徐偉杰;梁煒;鳳超;;WIA-PA網絡關鍵技術的設計與實現[J];計算機應用研究;2011年06期

5 趙華;凌志浩;;熱電阻無線溫度變送器的設計[J];南京信息工程大學學報(自然科學版);2009年01期

6 劉路明;凌志浩;;基于低功耗技術的工業無線溫度變送器[J];計算機工程;2010年01期

7 劉任慶;劉莉娜;;基于ZigBee技術的工業無線溫度變送器的設計和實現[J];通信技術;2009年06期

8 廖明燕;崔鳳新;鄭金吾;;基于MSP430的多處理器通信技術研究[J];微處理機;2006年01期

9 譚曉寧;;工業無線技術的標準及相關網絡分類[J];醫藥工程設計;2009年04期

10 趙明,徐科軍,倪偉,陳智淵;一種無線傳感器網絡節點設計和通信協議研究[J];儀器儀表學報;2005年S2期

，

本文編號：1830204