本文選題：電動汽車 + 充電站�。� 參考：《華北電力大學》2014年碩士論文

【摘要】：在傳統化石能源匱乏、生態環境惡化的今天，汽車的大規模發展和使用不僅消耗了巨量能源，還產生了大量有害氣體引起環境惡化，近年來我國北方地區發生的嚴重霧霾現象，雖然各個品牌的汽車制造廠商都致力于發展高效率發動機，盡可能把降低汽車污染程度，，但其仍要靠依托于常規能源作為動力，面對自然資源的日益枯竭，發展新能源汽車才是有效解決能源環境壓力的有效途徑。電動汽車具有高扭矩，無污染，低噪聲等諸多優點，是未來汽車工業的主要發展方向，必將有廣泛的發展前景。而隨著電動汽車行業的發展，必須建設相配套的充（換）電站才能夠可靠，穩定，高效得為其服務。 本文首先針對電動汽車交流充電樁以及充電站進行了簡要的介紹，闡述了電動汽車充電站的分類和主要構成單元，分析了交流充電樁和充電站比較典型的建設方案并系統得描述了電動汽車充電機的各部分構成及其作用。圍繞電動汽車充電站的充放電管理系統，介紹了電動汽車充電站的充放電方式、充放電技術及發展現狀，研究了充放電管理系統的軟件和硬件方案。針對幾種不同種類的充電機型對電動汽車充電站引起的電能質量問題及其危害進行了重點分析，并提出了多種電動汽車充電站諧波治理措施，隨后利用Matlab/Simulink搭建了蓄電池充電模型和充電站模型，對APF在電動汽車充電站諧波治理的效果進行了仿真實驗分析。最后根據《國家電網公司電動汽車充放電站建設指導意見》和邢臺供電公司出臺的《電動汽車智能充換電服務網絡發展規劃》，設計了一套電動汽車充電站建設方案，設計了充放電管理系統的硬件配置和軟件配置方案，通過對充電站的負荷特性進行分析，進而對其負荷特性對充電站中配置的各種設備進行比較選擇，最后設計了充電站的主接線以及監控系統，從而完成整個充電站的設計建造方案。
[Abstract]:Today, with the shortage of traditional fossil energy and the deterioration of ecological environment, the large-scale development and use of automobiles not only consumes huge amount of energy, but also produces a large number of harmful gases to cause environmental deterioration. In recent years, serious haze phenomenon has occurred in northern China.Although car manufacturers of all brands are committed to developing efficient engines to minimize the degree of vehicle pollution, they still rely on conventional energy as a driving force in the face of the growing depletion of natural resources.The development of new energy vehicles is an effective way to solve the pressure of energy environment.Electric vehicle (EV) has many advantages such as high torque, no pollution, low noise and so on. It is the main developing direction of automobile industry in the future.With the development of electric vehicle industry, it is necessary to build a matching charging (replacement) power station to be reliable, stable and efficient to serve it.In this paper, the AC charging piles and charging stations of electric vehicles are introduced briefly, and the classification and main components of charging stations of electric vehicles are described.The typical construction schemes of AC charging pile and charging station are analyzed and the components and functions of electric vehicle charger are described systematically.Around the charge and discharge management system of electric vehicle charging station, this paper introduces the charging and discharging mode, charging and discharging technology and development status of electric vehicle charging station, and studies the software and hardware scheme of charge and discharge management system.Aiming at several kinds of charging models, the problems of electric power quality caused by charging stations of electric vehicles and their harms are analyzed emphatically, and the harmonic treatment measures for various charging stations of electric vehicles are put forward.Then, the battery charging model and charging station model are built by using Matlab/Simulink, and the effect of APF on harmonic control of electric vehicle charging station is simulated and analyzed.Finally, according to the "State Grid Company Electric vehicle charging and discharging Station Construction guidance" and Xingtai Power supply Company's "Electric vehicle Intelligent charging and switching Service Network Development Plan", a set of electric vehicle charging station construction scheme is designed.The hardware configuration and software configuration of the charging and discharging management system are designed. Through the analysis of the load characteristics of the charging station, the load characteristics of the charging station are compared and selected.Finally, the main connection and monitoring system of the charging station are designed to complete the design and construction of the charging station.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U491.8

【參考文獻】

相關期刊論文 前10條

1 周洪超;李海鋒;;基于博弈論的電動汽車充電站選址優化模型研究[J];科技和產業;2011年02期

2 康繼光;衛振林;程丹明;徐凡;;電動汽車充電模式與充電站建設研究[J];電力需求側管理;2009年05期

3 楊永標;丁孝華;朱金大;白義傳;;物聯網應用于電動汽車充電設施的設想[J];電力系統自動化;2010年21期

4 吳春陽;黎燦兵;杜力;曹一家;;電動汽車充電設施規劃方法[J];電力系統自動化;2010年24期

5 李惠玲;白曉民;;電動汽車充電對配電網的影響及對策[J];電力系統自動化;2011年17期

6 劉志鵬;文福拴;薛禹勝;辛建波;;電動汽車充電站的最優選址和定容[J];電力系統自動化;2012年03期

7 田立亭;史雙龍;賈卓;;電動汽車充電功率需求的統計學建模方法[J];電網技術;2010年11期

8 高賜威;張亮;;電動汽車充電對電網影響的綜述[J];電網技術;2011年02期

9 杜愛虎;胡澤春;宋永華;吳俊陽;;考慮電動汽車充電站布局優化的配電網規劃[J];電網技術;2011年11期

10 胡明輝,秦大同,舒紅;混合動力汽車蓄電池的快速充電方法[J];重慶大學學報(自然科學版);2004年11期

本文編號：1740807