發布時間：2018-06-17 16:46

  本文選題：燈光控制 + WiFi　； 參考：《南京郵電大學》2015年碩士論文

【摘要】：無線網絡技術因其靈活性、移動性、便捷性在各個領域得到了廣泛應用,并在某些特殊網絡應用中充當重要角色。燈光終端控制系統對無線網絡技術同樣存在應用需求,此前的應用停留在單體單個的路燈控制,對廣泛的舞臺燈光、景觀燈光的控制缺少應用,因此設計一種高效、靈活的廣義無線燈光終端控制系統具有很高的應用價值。在研究傳統燈控系統的不足之后,本文提出了一種基于無線網絡的燈光終端控制系統,其以無線組網為核心并合理優化了系統性能。本文根據燈光控制系統的需求和應用場合特點,選擇WiFi協議作為系統無線組網技術;在應用層選擇ACN協議以實現對燈光終端的控制;在網絡層通過無線AP構建了Infra基礎結構型網絡,然后選擇了RIP路由協議來交換網絡IP數據包;在系統的安全性和可靠性方面,本文選用了WPA2加密算法以提高系統安全性,設計了故障處理模塊并選擇了相應的備份機制以保障可靠性。在網絡系統同步方面,由于NTP協議在燈光控制系統的局限性,為了提高系統可靠性,本文在NTP協議的基礎上,提出了改進的LNTP協議,通過對應的系統流程和算法來保證系統的可靠同步;同時研究和分析了無線網絡的覆蓋范圍特性及干擾問題;通過分析信號傳播模型及頻道分配特性后提出了最優頻段分配方法及抗干擾方式。最后本文驗證了時鐘同步系統的有效性,并且具體設計了WiFi模塊的收/發流程。本文設計的基于無線網絡的燈光終端控制系統具有靈活度高、可拓展性高、易于部署等優點,可利用于體育場、演播廳、展館等領域還可用于老舊場館的燈光改造系統。
[Abstract]:Wireless network technology has been widely used in various fields because of its flexibility, mobility and convenience, and plays an important role in some special network applications. The lighting terminal control system also has the application demand to the wireless network technology, the previous application stays in the single individual street lamp control, to the widespread stage light, the landscape light control lacks the application, therefore designs a kind of high efficiency, The flexible generalized wireless lighting terminal control system has high application value. After studying the shortcomings of the traditional lamp control system, this paper proposes a kind of lighting terminal control system based on wireless network, which takes wireless networking as the core and optimizes the system performance. According to the demand of the lighting control system and the characteristics of the application situation, the WiFi protocol is chosen as the wireless networking technology of the system, and the ACN protocol is selected in the application layer to realize the control of the lighting terminal. In the network layer, Infra infrastructure network is constructed through wireless AP, then RIP routing protocol is chosen to exchange IP packets in the network layer, and WPA2 encryption algorithm is selected to improve the system security in terms of system security and reliability. The fault processing module is designed and the corresponding backup mechanism is selected to ensure the reliability. In the aspect of network system synchronization, because of the limitation of NTP protocol in lighting control system, in order to improve the reliability of the system, this paper proposes an improved LNTP protocol based on NTP protocol. Through the corresponding system flow and algorithm to ensure the reliable synchronization of the system, at the same time, the coverage characteristics and interference problems of wireless network are studied and analyzed. After analyzing the signal propagation model and channel allocation characteristics, the optimal frequency band allocation method and anti-jamming method are proposed. Finally, the validity of clock synchronization system is verified, and the receiving / sending flow of WiFi module is designed. The light terminal control system based on wireless network has the advantages of high flexibility, high expansibility and easy deployment. It can be used in the fields of stadium, studio, exhibition hall and so on.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TP273;TN92

【參考文獻】

相關期刊論文 前1條

1 沈燕芬;用于網絡時間同步的NTP協議[J];現代計算機(專業版);2004年04期

，

本文編號：2031713