發布時間：2018-05-30 07:13

  本文選題：血管介入手術 + 遙操作��； 參考：《天津理工大學》2017年碩士論文

【摘要】：近些年來,全球每年患心腦血管疾病將近1700萬人,已經成為威脅人類生命健康的頭號殺手。隨著科學技術的發展,治療手段也在逐步提升,但依然存在一些問題,比如醫生在操作過程中無法避免的受到X光的輻射等,主從操作的介入手術機器人得到了廣泛的應用,解決了一些傳統手術存在的問題,但目前已有的血管介入手術機器人系統存在力反饋系統結構復雜、穩定性差的問題,因此,本文設計了一種新型的基于力反饋的血管介入手術機器人系統的主端操作系統,并對其進行了評估。針對現階段已有的血管介入手術機器人系統力反饋檢測系統誤差大的問題,本文提出了一種新型血管介入手術機器人輔助系統的主端操作器,本研究是基于電磁感應原理設計的一種新型主端力反饋系統,將電磁力作為從端導管在血管中的碰撞力傳遞給醫生的手。除此之外,醫生在操作過程中操作一根實際手術中用到的真實導管,它能夠通過主側的手術導管將從操作器檢測到的手術導管所受阻力反饋到醫生手上,提供給醫生一種觸覺臨場感,有利于提高手術安全性。而且能充分利用在傳統血管介入手術中的經驗進行操作,以防因觸覺差異而產生誤差。針對操作系統軸向運動信息由直線位移傳感器測量精度不夠的問題,本文提出了用光電編碼器代替直線位移傳感器測量運動信息,再用正交解碼芯片形成四倍頻,將光電編碼器的旋轉角度轉換為前進后退的位移,再利用數碼管將位移信息直觀地顯示給醫生。本系統的從端操作器是整個手術過程中實際送導管的一端。導管的尖端及側壁都裝有力檢測傳感器,再傳到醫生的手,感應從端的受力情況。本文提出了一種新型基于力反饋的血管介入手術機器人系統的主端操作器的設計與研究,并對整個系統進行力反饋系統的評估及驗證,得到力反饋最大誤差小于6mN;最后測試新主從操作系統主從追蹤的穩定性,評估整個新系統性能,得到軸向追蹤系統最大誤差小于1.6 mm,徑向追蹤系統最大誤差小于3.6°,說明主從端同步跟隨性能較為穩定。
[Abstract]:In recent years, nearly 17 million people worldwide suffer from cardiovascular and cerebrovascular diseases every year, which has become the leading killer of human life and health. With the development of science and technology, the treatment methods are also gradually improved, but there are still some problems, such as the doctors can not avoid the X-rays radiation in the operation, the master-slave interventional surgery robot has been widely used. Some problems existed in traditional surgery have been solved, but the existing vascular interventional surgery robot system has the problems of complex structure of force feedback system and poor stability. In this paper, a new main operating system of vascular interventional robot system based on force feedback is designed and evaluated. In order to solve the problem of large error in the force feedback detection system of vascular interventional robot system, this paper presents a new type of main end manipulator for the assistant system of vascular interventional surgery robot. Based on the principle of electromagnetic induction, a new feedback system of main force is designed in this paper. The electromagnetic force is transferred to the doctor's hand as the collision force from the end catheter in the blood vessel. In addition, the doctor operates a real catheter that is used in the actual operation, which can feed back to the doctor's hand the resistance from the surgical catheter detected by the operator through the main side of the catheter. To provide doctors with a sense of tactile telepresence, is conducive to improve the safety of surgery. And it can make full use of the experience in traditional vascular interventional surgery to prevent errors caused by tactile differences. In order to solve the problem that the measurement accuracy of the axial motion information of the operating system is not enough by the linear displacement sensor, this paper proposes that the photoelectric encoder is used instead of the linear displacement sensor to measure the motion information, and then the quadrature decode chip is used to form the four times frequency. The rotation angle of the photoelectric encoder is converted into the forward and backward displacement and the displacement information is displayed intuitively to the doctor by using the digital tube. The slave operator of the system is one end of the actual delivery catheter during the whole operation. The tip and side walls of the catheter are fitted with force sensors, which are passed to the doctor's hand to sense the force from the end. This paper presents the design and research of a new type of force feedback based primary manipulator for vascular interventional robot system, and evaluates and verifies the force feedback system of the whole system. The maximum error of force feedback is less than 6 mn. Finally, the stability of master-slave tracking of the new master-slave operating system is tested, and the performance of the whole new system is evaluated. The maximum error of the axial tracking system is less than 1.6 mm and the maximum error of the radial tracking system is less than 3.6 擄, which indicates that the synchronization performance of the master-slave end is stable.
【學位授予單位】：天津理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP242

【相似文獻】

相關期刊論文 前10條

1 成舸;梁國清;;國產手術機器人首次用于臨床 打破國外同類技術壟斷[J];黑龍江科技信息;2014年10期

2 羅丹;;進口醫生“達·芬奇”[J];新知客;2009年05期

3 郭躍華,周漢新;手術機器人的發展與現狀[J];中華外科雜志;2005年01期

4 周永春;王樹新;丁杰男;李群智;;顯微外科手術機器人手指系統的研究與開發[J];機器人;2006年01期

5 梁修瀅;李群智;丁杰男;王樹新;;喉部手術機器人手指系統設計[J];機械設計與制造;2007年02期

6 洪在地;，

本文編號：1954416