發布時間：2018-01-16 11:24

  本文關鍵詞：基于FPGA的噴墨寫真機噴頭驅動系統設計　出處：《鄭州大學》2010年碩士論文　論文類型：學位論文

  更多相關文章： 噴墨寫真機 熱發泡式 FPGA 噴頭驅動

【摘要】： 噴墨寫真機是一種主要應用于廣告領域的計算機外部設備。電子技術的發展和可編程邏輯器件的出現,極大地促進了噴墨寫真機技術的發展,使得高速的數據傳輸和高精度的噴墨控制成為可能。 本文分析了噴墨寫真機的工作原理,比較了噴墨寫真機常用的幾種構架,提出了一種基于PC機+主控制板(ARM)+小車驅動板(FPGA)的新構架。該構架充分利用PC機的強大數據處理功能,減輕了下位機的負擔,減少了設計成本和開發周期。 文中重點介紹了熱發泡式噴頭的工作原理,結合該類型噴頭,設計了一種基于可編程邏輯器件FPGA的噴墨寫真機噴頭并行驅動系統。該系統具有噴頭狀態檢測功能,方便用戶排除故障,提高工作效率。利用FPGA對USB控制器進行讀寫操作,實現了與PC機的高速數據傳輸。為了滿足大容量的數據存儲要求,基于FPGA設計了SDRAM控制器,控制SDRAM的數據存儲。最終實現了打印介質幅寬150cm,打印速度22m2／h,打印精度1200*600DPI,基本達到了國外主流樣機的性能。
[Abstract]:Inkjet photograph machine is a kind of computer peripheral equipment which is mainly used in advertisement field. The development of electronic technology and the appearance of programmable logic device have greatly promoted the development of inkjet photofinishing machine technology. Make high-speed data transmission and high-precision inkjet control possible. In this paper, the working principle of inkjet photofinishing machine is analyzed, and several frameworks of inkjet photofinishing machine are compared. This paper presents a new frame based on PC main control board (ARM) car driving board (FPGA), which makes full use of the powerful data processing function of PC and reduces the burden of lower computer. Reduced design cost and development cycle. In this paper, the working principle of hot foaming nozzle is introduced, combined with this type of nozzle. In this paper, a parallel driving system based on FPGA is designed. The system has the function of detecting the state of the jet head, which is convenient for the user to troubleshoot. In order to meet the requirement of large capacity data storage, the high speed data transmission with PC is realized by using FPGA to read and write the USB controller. A SDRAM controller based on FPGA is designed to control the data storage of SDRAM. Finally, the printing medium width is 150 cm and the printing speed is 22 m2 / h. The printing accuracy is 1200 DPI, which basically achieves the performance of the foreign mainstream prototype.
【學位授予單位】：鄭州大學
【學位級別】：碩士
【學位授予年份】：2010
【分類號】：TS951.43;TN791

【引證文獻】

相關期刊論文 前3條

1 馬琦;吉春花;蘭興;王海濱;;基于同步Slave FIFO技術的高速USB數傳系統設計[J];單片機與嵌入式系統應用;2013年07期

2 劉忠坤;李業麗;陸利坤;程明智;;基于FPGA噴墨頭控制系統的設計與實現[J];北京印刷學院學報;2013年04期

3 俞叢晴;占紅武;梅燦華;;工業打印系統數據通道設計[J];輕工機械;2013年03期

相關碩士學位論文 前1條

1 俞叢晴;基于FPGA的印刷系統數據通道設計[D];浙江工業大學;2012年

，

本文編號：1432844