發布時間：2018-04-10 04:37

  本文選題：自動測試系統　切入點：虛擬儀器　出處：《吉林大學》2017年碩士論文

【摘要】：隨著計算機技術的飛速發展,計算機技術和電子測量技術的結合形成了自動測試系統,使得電子測量技術產生了質的飛躍。自動測試系統在測試速度、效率、精度、可靠性以及測試數據的可交換性等方面較傳統的電子測量儀器更具優勢。虛擬電子測量儀器集成系統是吉林大學自己研制的一套自動測試系統,采用模塊化的設計理念,將各種電子測量儀器集成為可以實現對應測量功能的模塊板卡,然后通過自定義的總線技術連接在一起,組建成為一個可以實現各種電子測量功能的測試工具。本文主要工作是虛擬電子測量儀器集成系統基礎架構的研究與設計。第一,研究現有的各種總線技術,提煉出一種適合本系統的總線技術;第二,設計系統控制器和各個模塊化儀器之間的通信協議;第三,設計USB2.0系統控制器用來實現上位機和模塊化儀器之間的數據通信,USB2.0系統控制器的設計包括硬件電路設計和固件程序開發;第四,系統驅動程序開發,系統驅動程序是上位機與系統控制器之間通信的“橋梁”,USB驅動程序內封裝了有關USB接口操作的函數,上位機LabVIEW通過調用DLL中的函數訪問USB通用驅動程序,實現對USB接口的操作。最后,通過系統測試驗證了本文所設計的虛擬電子測量儀器集成系統基礎架構能夠?qū)崿F(xiàn)上位機軟件與模塊化儀器之間的通信,達到設計目標。
[Abstract]:With the rapid development of computer technology, the combination of computer technology and electronic measurement technology has formed an automatic test system, which has made a qualitative leap in electronic measurement technology.The automatic test system has more advantages than the traditional electronic measuring instruments in the aspects of test speed, efficiency, precision, reliability and the exchangeability of test data.Virtual electronic measuring instrument integration system is a set of automatic test system developed by Jilin University. With the modular design concept, various electronic measuring instruments can be integrated into a module card that can realize the corresponding measurement function.Then it is connected by custom bus technology to form a testing tool which can realize various electronic measurement functions.The main work of this paper is the research and design of the integrated system infrastructure of virtual electronic measuring instruments.First, study the existing bus technology, extract a bus technology suitable for the system; second, design the communication protocol between the system controller and various modular instruments; third,The design of USB2.0 system controller is used to realize the data communication between host computer and modularized instrument. The design of USB2.0 system controller includes hardware circuit design and firmware program development.The system driver is the "bridge" of communication between the host computer and the system controller, which encapsulates the function of the USB interface operation. The upper computer LabVIEW accesses the USB universal driver by calling the function in the DLL.Implement the operation of USB interface.Finally, the system test proves that the integrated system infrastructure of virtual electronic measurement instrument designed in this paper can realize the communication between the host computer software and the modular instrument, and achieve the design goal.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP274

【參考文獻】

相關期刊論文 前10條

1 王園園;;基于LabVIEW電子測量虛擬實驗平臺設計[J];自動化與儀器儀表;2015年10期

2 劉強;王旭;李志剛;;雙口RAM在多CPU小衛星綜合電子計算機中的應用[J];計算機測量與控制;2014年11期

3 張松;李筠;;FPGA的模塊化設計方法[J];電子測量與儀器學報;2014年05期

4 劉志華;郭付才;彭新偉;陳吉東;;基于CY7C68013A的FPGA配置和通信接口設計[J];電子技術應用;2013年02期

5 謝勇;姚遠程;秦明偉;;基于USB2.0與LabVIEW的高速數據采集系統設計[J];電子設計工程;2012年19期

6 陶彥輝;;基于CyAPI控制函數類的USB數據采集[J];機械工程與自動化;2011年02期

7 苗立交;楊新華;王巍;;基于LabVIEW的動態鏈接庫的設計與調用[J];工業儀表與自動化裝置;2010年04期

8 秦鴻剛;劉京科;吳迪;;基于FPGA的雙口RAM實現及應用[J];電子設計工程;2010年02期

9 李t，

本文編號：1729732