發布時間：2018-07-29 18:23

【摘要】：計算機輔助公差設計(Computer Aided Tolerancing,簡稱CAT)是利用計算機技術對制造過程中產品的公差進行設計和優化,從而實現生產周期、制造成本和產品質量的精確控制。在產品的裝配設計階段或者產品的裝配實施階段,利用計算機輔助工具,分析產品的設計公差或者產品的實際加工誤差,預測出產品的裝配精度,利用預測值來評價裝配質量與產品性能,比較裝配結果是否滿足設計要求和使用需求,進而達到避免裝配方案錯誤、減少裝配調整次數的目的。 本文首先在分析Pro/ENGINEER裝配模型的結構特點的基礎上,設計裝配精度信息的數據結構,并探究如何從CAD裝配模型中提取相關裝配信息。然后,設計智能搜索算法以獲得準確的裝約鏈。研究解決尺寸位置提取、其它信息的計算等問題的方法,實現裝配尺寸鏈自動生成。 然后,本文以裝配尺寸鏈的精度計算為出發點,建立三維裝配尺寸鏈圖,綜合分析了不同的公差分析方法,并修正了三維裝配尺寸鏈的計算公式,通過綜合考慮影響裝配精度的尺寸公差、形位誤差、環境溫度以及公差分析方法等方面影響因素,建立了裝配精度預測的數學模型。 最后,基于Pro/ENGINEER利用Microsoft Visual Studio開發了裝配精度預測原型系統,并設計裝配精度比較實驗。該原型系統在CAD環境下得到的預測值與實際測量值的偏差、預測值與設計要求值的偏差均在可允許范圍內。
[Abstract]:Computer aided tolerance Design (Computer Aided Tolerancing,) is the use of computer technology to design and optimize the product tolerance in the manufacturing process, so as to achieve accurate control of production cycle, manufacturing cost and product quality. In the stage of product assembly design or product assembly implementation, the design tolerance of product or the actual processing error of product are analyzed by means of computer aided tools, and the assembly accuracy of product is predicted. The prediction value is used to evaluate the assembly quality and product performance, and to compare whether the assembly results meet the design requirements and the application requirements, so as to avoid the assembly scheme errors and reduce the assembly adjustment times. On the basis of analyzing the structural characteristics of Pro/ENGINEER assembly model, this paper designs the data structure of assembly precision information, and probes into how to extract relevant assembly information from CAD assembly model. Then, the intelligent search algorithm is designed to obtain accurate reduction chain. The methods to solve the problems of dimension location extraction and other information calculation are studied to realize the automatic generation of assembly dimension chain. Then, taking the precision calculation of assembly dimension chain as the starting point, the three-dimensional assembly dimension chain diagram is established, the different tolerance analysis methods are comprehensively analyzed, and the calculation formula of three-dimensional assembly dimension chain is revised. The mathematical model of assembly accuracy prediction is established by taking into account the influence factors such as dimension tolerance, shape and position error, ambient temperature and tolerance analysis method. Finally, an assembly precision prediction prototype system based on Pro/ENGINEER and Microsoft Visual Studio is developed, and the assembly accuracy comparison experiment is designed. The deviation between the predicted value and the actual measured value and the deviation between the predicted value and the design requirement value of the prototype system under CAD environment are all within the allowable range.
【學位授予單位】：哈爾濱工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH164;TG95

【參考文獻】

相關期刊論文 前10條

1 張愛平;整機裝配工藝設計分析[J];電子機械工程;2002年06期

2 田立中,馬玉林,姬舒平;裝配尺寸鏈自動生成的研究[J];工程設計;2000年04期

3 郭長虹;席平;;基于裝配尺寸鏈的計算機輔助飛機公差設計[J];航空制造技術;2006年08期

4 何勝?gòu)?qiáng);;飛機數字化裝配技術體系[J];航空制造技術;2010年23期

5 劉玉生,楊將新,吳昭同,高曙明;CAD系統中公差信息建模技術綜述[J];計算機輔助設計與圖形學學報;2001年11期

6 趙皇進;鄭國磊;段麗華;;數字化環境下裝配尺寸鏈分析的幾何方法[J];計算機輔助設計與圖形學學報;2008年01期

7 劉偉東;寧汝新;劉檢華;尚煒;;虛擬裝配系統中幾何精度三維標注技術與方法[J];計算機輔助設計與圖形學學報;2010年08期

8 方斌;常明;;基于UG的裝配特征自動識別及其逆向參數化方法研究[J];機械設計與制造;2007年11期

9 江思敏,劉向鋒,高志,李恩哲,胡榮,孫旭東;基于配合特征的配合零件鏈自動生成[J];機械設計;2000年11期

10 黃其圣,張勇,胡鵬浩,郭元;溫度變化對機械零件配合精度的影響[J];機械設計;2001年03期

，

本文編號：2153601