【摘要】：針對現有的藍寶石單晶生長冷卻水系統的水溫控制精度不高、波動范圍大和不穩定的問題,經過分析水溫變化的滯后特性和爐內溫度的變化,提出一套通過比例水閥連續調節由制冷變頻機組和中間換熱設備雙回路混合后冷卻水的溫度控制方法。在Matlab/Simulink仿真環境中,仿真結果表明,參數自整定模糊PID控制器與常規PID相比具有不依賴系統模型、響應快、控制精度高的優點,且易于PLC控制器實現,使得水溫有效的控制在(25±1)℃,適用于藍寶石單晶生長冷卻水系統的水溫控制。
[Abstract]:Aiming at the problems of low control precision, large fluctuation range and unstable water temperature in the existing cooling water system of single crystal sapphire growth, the hysteresis characteristic of water temperature change and the variation of temperature in furnace are analyzed. This paper presents a method for controlling the temperature of cooling water continuously adjusted by proportional water valve after cooling water is mixed by refrigerating variable frequency unit and intermediate heat exchanger. In the Matlab/Simulink simulation environment, the simulation results show that the parameter self-tuning fuzzy PID controller has the advantages of independent system model, fast response, high control precision, and is easy to be implemented by PLC controller. The water temperature is effectively controlled at (25 鹵1) 鈩，

本文編號：2414761