發布時間：2018-06-15 00:09

  本文選題：復雜曲面噴涂 + 曲面分片��； 參考：《東南大學》2016年碩士論文

【摘要】：本論文課題以“高檔數控機床與基礎制造設備”國家重大科技專項“15kg噴涂機器人成套裝備”項目為背景,研究并實現面向復雜曲面的噴涂機器人作業規劃方法。由于復雜自由曲面表面特征不同于一般的平面與拉伸曲面,本文研究并實現一種新的方法來解決復雜曲面上的噴涂機器人作業規劃問題,該方法分為三個部分：曲面分片、子片噴涂路徑規劃和子片連接。復雜自由曲面幾何特征(形狀、曲率等)和拓?fù)涮卣?孔洞等)復雜,這些都增加了噴涂路徑規劃的難度。因此本文首先分析曲面上的拓?fù)涮卣骱蛶缀翁卣?然后對曲面分片,將復雜自由曲面分割為若干具有簡單拓?fù)涮卣髋c幾何特征的簡單子曲面。對于曲面上有孔洞等情形,采用投影法,對曲面進行拓?fù)浞制?把曲面分成幾個獨立的子片,每一片上不包含孔洞；對于包含圓孔這樣的特殊工件,本文通過選取兩個特殊平面將曲面分割成幾個獨立的子片,進行拓?fù)浞制�。其次每一分片上可能曲率變化�?通過設置相鄰角閾值和最大背離角,對其進行幾何分片,使得每一分片上的曲率接近,變化不大。曲面分片之后,通常每一子片并不是平面,其曲率在各方向上都可能變化,為此,針對復雜曲面論文研究并實現了一種基于種子曲線、變速變間距的噴涂路徑規劃方法以進一步提高噴涂效果。首先確定曲面上一條曲線作為種子曲線,以該種子曲線作為基準線,平移得到曲面上所有噴涂行程。種子曲線選擇的原則是,規劃好之后曲面上的行程盡量少,而且行程之間不會相交。然后,將每一行程分段,每一段上速度不同,通過對分段速度優化,使得行程方向涂層累積速率近似不變。再對行程間距優化,考慮到多條行程對同一點膜厚會產生影響,這里同時對4條行程優化,提高噴涂規劃準確性。由于速度優化與間距優化,都是針對多變量的,采用BOBYQA優化方法,得到所有行程間距以及每一條行程上的分段速度,進而得到子片上的噴槍路徑。在子片噴槍路徑規劃的基礎上,為了獲得完整的噴槍路徑,需要將這些獨立的子片路徑連接起來,經過所有子片上的噴槍路徑,并且行進的路徑最短。本文將子片路徑連接問題建模為廣義TSP問題模型,采用蟻群算法來得到優化解,進而連接子片噴槍路徑間的起點與終點,形成一條完整的噴槍路徑,并生成中間語言程序。蟻群算法與之前采用的啟發式搜索算法如遺傳算法相比,收斂速度更快,而且排序優化結果更好即連接路徑的長度更短,這些優勢在子片噴涂路徑數量增加時更明顯。最后針對典型工件,仿真驗證噴涂路徑規劃與參數優化的噴涂結果。本文完成了面向復雜自由曲面的噴涂機器人作業規劃方法研究與實現,該方法能夠針對復雜自由曲面,規劃出噴槍路徑,經噴涂作業規劃系統仿真驗證,能較好地滿足項目需求。
[Abstract]:Based on the project of "High-grade NC Machine tool and basic Manufacturing equipment" and "15kg spray Robot complete equipment", the paper studies and realizes the operation planning method of spray-robot facing complex curved surface. Because the surface features of complex free-form surfaces are different from those of general plane and stretch surfaces, this paper studies and implements a new method to solve the problem of job planning of spray-robot on complex surfaces. The method is divided into three parts: surface segmentation. Subblade spray path planning and sub-strip connection. The geometric features (shape, curvature, etc.) of complex free-form surfaces and topological features (holes, etc.) are complex, all of which increase the difficulty of spray path planning. In this paper, we first analyze the topological and geometric features of surfaces, and then divide the complex free-form surfaces into several simple subsurfaces with simple topological and geometric features. In the case of a hole in a curved surface, the surface is topologically divided into several separate subslices, each of which does not contain holes, and for a special workpiece such as a circular hole, In this paper, two special planes are selected to divide the surface into several independent subslices. Secondly, the possible curvature changes greatly on each slice. By setting the threshold of adjacent angle and the maximum deviation angle, the geometric partition is carried out to make the curvature of each slice close, and the change is not significant. After the surface is partitioned, each subslice is usually not a plane, and its curvature may change in every direction. Therefore, a seed curve based on the complex surface is studied and implemented in this paper. The spray path planning method with variable speed and variable spacing is used to further improve the spraying effect. First, a curve on the surface is determined as the seed curve, and the seed curve is used as the datum line, and all spray stroke on the surface is obtained by translation. The principle of seed curve selection is that there are as few trips on the surface as possible after planning, and there is no intersecting between them. Then, the speed of each stroke segment and each section is different, and the cumulative rate of the coating is approximately unchanged by optimizing the segmented velocity. Considering the influence of multiple stroke on the thickness of film at the same point, four strokes are optimized at the same time to improve the accuracy of spray planning. Because velocity optimization and spacing optimization are all aimed at multivariable, using BOBYQA optimization method, we can get all travel distance and the segmented velocity on each stroke, and then get the spray gun path on the sub-chip. On the basis of the path planning of the sub-piece spray gun, in order to obtain the complete spray gun path, these independent sub-slice paths need to be connected together, passing through all the spray gun paths on the sub-slices, and the path is the shortest. In this paper, the subslice path connection problem is modeled as the generalized tsp problem. Ant colony algorithm is used to obtain the optimal solution, and then the starting point and the end point between the sub-slice spray gun paths are connected to form a complete spray gun path and generate the intermediate language program. Compared with the previous heuristic search algorithm such as genetic algorithm, ant colony algorithm has faster convergence speed and better ranking optimization result, that is, the length of connection path is shorter. These advantages are more obvious when the number of spraying paths increases. Finally, the results of spraying path planning and parameter optimization are verified by simulation for typical workpieces. This paper has completed the research and implementation of the job planning method for the complex free-form surface spraying robot. The method can plan the spray gun path for the complex free-form surface, and it is verified by the simulation of the spraying job planning system. Be able to meet project requirements well.
【學位授予單位】：東南大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP242

【相似文獻】

相關期刊論文 前10條

1 ;小型噴涂機器人[J];現代制造;2007年S1期

2 劉遠江;;創新方為致勝之本[J];機器人技術與應用;2006年06期

3 沈航;;側掛噴涂機器人移載裝置的結構開發與研制[J];制造業自動化;2007年08期

4 沈航;;側掛噴涂機器人移載裝置的結構開發與研制[J];伺服控制;2008年05期

5 丁度坤;謝存禧;張鐵;鄒焱飚;;噴涂機器人控制系統的開發與研究[J];機床與液壓;2009年03期

6 周偉;謝存禧;;基于6R噴涂機器人的多軸運動控制系統設計[J];機械設計與制造;2010年03期

7 李晟;;蒂森克虜伯尼羅斯塔公司將使用噴涂機器人進行電爐維修[J];世界鋼鐵;2010年03期

8 陳勇武;;基于ANSYS Workbench的噴涂機器人的模態分析[J];現代機械;2011年02期

9 康國坡;陳新度;夏鴻建;;基于動力學分析的噴涂機器人電機選型[J];機械設計與制造;2012年12期

10 聶勇剛;許瑛;吳少興;潘雨卿;;噴涂機器人正壓防爆系統的設計[J];機械制造;2013年02期

相關會議論文 前3條

1 潘永亮;;內裝噴涂機器人在連續鏈生產線的應用探索[A];“廣汽豐田杯”廣東省汽車行業第七期學術會議論文集[C];2013年

2 黃健;;中間包噴涂機器人[A];中國金屬學會2003中國鋼鐵年會論文集（3）[C];2003年

3 馬利;許向陽;;噴涂機器人五自由度機械臂的建模與仿真[A];全國自動化新技術學術交流會會議論文集（一）[C];2005年

相關重要報紙文章 前3條

1 王文;世界最小噴涂機器人將亮相[N];現代物流報;2008年

2 駐昆山首席記者 姚喜新　通訊員 曹勇;昆山將造“噴涂機器人”[N];蘇州日?qǐng)?bào);2010年

3 記者 呂毅;埃夫特與意大利CMA公司強強聯手[N];蕪湖日?qǐng)?bào);2014年

相關博士學位論文 前4條

1 呂世增;空心非球型手腕噴涂機器人設計及關鍵技術研究[D];天津大學;2012年

2 陳偉;噴涂機器人軌跡優化關鍵技術研究[D];江蘇大學;2013年

3 王戰中;噴涂機器人連續3R斜交非球型手腕設計方法與實踐[D];天津大學;2008年

4 曾勇;大型復雜自由曲面的噴涂機器人噴槍軌跡優化研究[D];蘭州理工大學;2011年

相關碩士學位論文 前10條

1 張兆智;基于UMAC串并混聯汽車噴涂機器人控制系統研究[D];電子科技大學;2014年

2 朱利中;飛機大部件噴涂機器人的設計與分析[D];電子科技大學;2015年

3 郭鵬;噴涂機器人結構優化及其位姿誤差分析[D];重慶大學;2015年

4 陳磊;六自由度關節型噴涂機器人結構設計及分析[D];重慶大學;2015年

5 武晨光;噴涂機器人傾角噴涂模型建立與軌跡優化研究[D];安徽理工大學;2016年

6 王曉琪;噴涂機器人運動學建模及仿真[D];北方工業大學;2016年

7 林威;五自由度噴涂機器人軌跡規劃研究[D];華中科技大學;2014年

8 吳炎凡;基于點云切片技術的噴涂機器人自編程技術研究[D];哈爾濱工業大學;2016年

9 陳濟澤;噴涂機器人軌跡規劃系統的研究[D];哈爾濱工業大學;2016年

10 劉傳輝;汽車涂裝機器人的改進研究[D];吉林農業大學;2016年

，

本文編號：2019607