本文選題：振動篩 + 軸承故障診斷�。� 參考：《煤炭學報》2017年09期

【摘要】：Teager能量算子解調方法在信號領域已經得到廣泛應用,但由于對噪聲較為敏感,造成其魯棒性較差。振動篩屬于振動機械設備中的篩分設備,其結構特點與運行原理與普通的旋轉機械有著很大不同,因此提取出的振動信號同旋轉機械提取出的振動信號也同樣有著較大區別,主要體現在,信號中不僅存在著大量的背景噪聲,而且信號中的成分也較為復雜,因此傳統的能量算子在振動機械的實際應用上受到了很大限制�；诖�,提出一種全新的能量算子方法—頻率加權能量算子,該方法在很大程度上解決了傳統能量算子關于噪聲敏感性的缺點。將該方法應用到仿真模擬實驗與振動篩實際應用中,并同傳統的能量算子進行比較,發現能夠很好的分離出故障頻率,證明了該方法具有實用性與優越性。
[Abstract]:The Teager energy operator demodulation method has been widely used in the signal field, but because of its sensitivity to noise, its robustness is poor. The vibrating screen belongs to the screening equipment in the vibration machinery. Its structural characteristics and operating principle are quite different from that of the ordinary rotating machinery. Therefore, the vibration signals extracted from the rotating machinery are the same as the rotating machinery. The vibration signals taken out are also different. It is mainly reflected in the fact that there are not only a large number of background noises in the signal, but also the complexity of the components in the signal. Therefore, the traditional energy operator has been greatly restricted in the practical application of vibration machinery. Based on this, a new energy operator method, frequency weighting, is proposed. The energy operator, to a great extent, solves the disadvantage of the noise sensitivity of the traditional energy operator. The method is applied to the simulation experiment and the practical application of the vibrating screen, and is compared with the traditional energy operator. It is found that the fault frequency can be separated well, and the method is proved to be practical and superior.

【作者單位】： 長安大學道路施工技術與裝備教育部重點實驗室;
【基金】：中央高校教育教學改革專項經費建設資助項目(jgy16049,0012-310600161000)
【分類號】：TD452;TD94

【相似文獻】

相關期刊論文 前1條

1 冷軍發;荊雙喜;禹建功;華偉;;EMD與能量算子解調在提升機齒輪箱故障診斷中的應用[J];煤炭學報;2013年S2期

，

本文編號：1838498