【摘要】：廣告的產生是商業發展的必然,它的出現極大的促進了商業的繁榮。傳統的廣告業借助的媒介一般是報刊、廣播、電視或網絡。但隨著現代科技的迅猛發展,廣告機作為新的傳播媒介逐漸走入人們視野。廣告機以較低的成本和高效的展示方式,掀起了廣告業發展的新篇章。 本課題研究的是基于嵌入式Linux的廣告機系統。Linux是目前使用最廣泛的操作系統之一,由于它是開源的,這極大的降低了設計成本。而且Linux具有較強的可移植性,因此對于后續的開發也有較好的保證。 本文的主要研究內容為： (1)規劃了廣告機系統的設計方案。本設計采用Mini2440開發板作為系統的硬件開發平臺,處理器S3C2440是基于ARM920T架構的,具有速度快、功耗低、價格便宜等優點。并且對軟件開發平臺做了詳細的介紹,包括Bootloader的選擇和嵌入式操作系統的選擇等。 (2)在Linux系統上建立了嵌入式交叉編譯環境,將編譯好的U-boot和嵌入式Linux內核移植到開發板上。并建立了根文件系統,移植了mplayer播放器,完成了廣告機系統應用軟件開發平臺的搭建。 (3)本文設計的廣告機應用程序采用了多線程編程技術。因此研究了多任務機制的特點以及為什么選擇多線程機制。并且學習了多線程的程序?qū)崿F(xiàn),包括線程的創建與終止、線程的互斥和同步。 (4)使用Qt編寫廣告機系統的應用程序,并使用Qtopia編譯后移植到開發板上。結果表明,系統各模塊功能運行正常,基本實現本文的設計目的。 本文設計的廣告機系統都是在Linux系統上進行調試的,并最終在Mini2440開發板上實現。本論文研究的廣告機系統,將廣告播放軟件移植到了嵌入式設備上,實現了對音視頻的播放,對解決傳統廣告形式成本過高的問題有實際的意義。
[Abstract]:Advertising is the inevitable development of business, it greatly promotes the prosperity of business. The traditional advertising industry usually relies on newspapers, radio, television or the Internet. However, with the rapid development of modern science and technology, advertising machine as a new media gradually into people's view. Advertising machine with low cost and efficient display, set off a new chapter in the development of advertising industry. This paper studies the advertising machine system based on embedded Linux. Linux is one of the most widely used operating systems at present. Because it is open source, this greatly reduces the design cost. Linux has strong portability, so it has a good guarantee for future development. The main contents of this paper are as follows: (1) the design scheme of advertising machine system is planned. The design adopts Mini2440 development board as the hardware development platform of the system. The processor S3C2440 is based on ARM920T architecture, which has the advantages of high speed, low power consumption and low price. The software development platform is introduced in detail, including the selection of bootloader and embedded operating system. (2) the embedded cross-compiling environment is established on Linux system. Transplant the compiled U-boot and embedded Linux kernel to the development board. The root file system is established, the mplayer player is transplanted, and the application software development platform of the advertisement machine system is built. (3) the application program of the advertisement machine designed in this paper adopts the multi-thread programming technology. Therefore, the characteristics of multitasking mechanism and why to choose multithreading mechanism are studied. And has learned the multithread program realization, including the thread creation and the termination, the thread mutual exclusion and the synchronization. (4) uses the QT to write the advertisement machine system application program, and uses the Qtopia compiles to transplant to the development board. The results show that the function of each module of the system is running normally and the design purpose of this paper is basically realized. The advertisement machine system designed in this paper is debugged on Linux system and finally implemented on Mini2440 development board. The advertisement machine system studied in this paper has transplanted the advertisement playing software to the embedded device, realized the audio and video playing, and has practical significance to solve the problem of the high cost of the traditional advertising form.
【學位授予單位】：昆明理工大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP368.1;TP316.81

【參考文獻】

相關期刊論文 前9條

1 楊勇;;Linux內核特點及移植[J];成都大學學報(自然科學版);2008年01期

2 何立民;嵌入式系統的定義與發展歷史[J];單片機與嵌入式系統應用;2004年01期

3 譚躍;蔣新華;;Linux中字符設備驅動程序開發的研究[J];福建電腦;2007年11期

4 石興杰，，鄒鵬;多線程概念及應用[J];計算機工程與科學;1995年03期

5 章曉燕,馬琪;嵌入式Linux系統的GUI—MiniGUI[J];計算機與現代化;2005年01期

6 張興財;楊康;崔向;;基于ARM的嵌入式LINUX系統中GUI的研究和實現[J];沈陽理工大學學報;2006年05期

7 趙海延;多線程及其實現方法[J];武漢工程職業技術學院學報;2002年03期

8 范朝陽，張良駒;多線程程序設計的概念與應用[J];小型微型計算機系統;1996年04期

9 李明;ARM Linux的移植過程及分析[J];電子設計應用;2003年07期

相關碩士學位論文 前3條

1 陳云鶴;基于Qt的嵌入式媒體播放器的設計與實現[D];華中科技大學;2006年

2 李艷民;基于Qt跨平臺的人機交互界面的研究和應用[D];重慶大學;2007年

3 朱毅;網絡廣告機的研究與開發[D];山東大學;2009年

本文編號：2125731