無速率解碼器驅動程序設計與實現
[Abstract]:Compared with the traditional communication technology, the adaptive transmission technology can dynamically match the channel conditions and has a higher spectral efficiency. Especially, the adaptive transmission technology based on rate-free code is attracting more and more attention because of its excellent performance. In this kind of adaptive system, the rate free decoder at the receiving end is the core equipment of the adaptive system, and its performance directly affects the stability and throughput of the adaptive system. In order to meet the high throughput requirement of the adaptive communication system, the driver of the rate free decoder is studied and designed in this paper. This paper first introduces the working principle of the rateless decoder and analyzes its working characteristics, and then proposes a three-layer driver structure: the bottom driver interface layer, the high-speed DMA transmission layer and the upper layer decoding control layer, among which, the following three layers are proposed: the bottom driver interface layer, the high speed DMA transmission layer and the upper layer decoding control layer. The bottom driver interface layer is a user-mode driver based on WinDriver, which is used to provide the basic communication interface between the device and the host, and the high-speed DMA transport layer realizes the high-speed DMA transmission channel, which is used to provide the high-speed communication link between the host and the decoding device. The upper decoding control layer realizes the scheduling and control of each decoding core in the decoder, and performs fault detection and recovery. The driver designed in this paper is based on WinDriver and all of it runs in user state. The driver responds to peripheral devices in polling mode, which fully ensures the high real-time performance of the decoder and the 300Mbps throughput of the system. The test results show that the drive works well in the adaptive system.
【學位授予單位】:華中科技大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:TN764;TP311.1
【相似文獻】
相關期刊論文 前10條
1 何江;事件驅動程序設計范型的缺陷及其對策[J];計算機應用;1997年04期
2 李心廣;實時數據接收系統的驅動程序設計[J];微計算機信息;1999年01期
3 ;PC急救組[J];電腦采購周刊;2001年11期
4 宋玉貴,王世凱,李海;基于Windriver Kernel PlugIn的驅動程序設計[J];西安工業學院學報;2005年04期
5 張素芹;徐飛;;基于嵌入式的故障診斷專家系統驅動程序設計[J];電子設計工程;2010年07期
6 陳明恭;微型計算機多用戶漢字信息操作系統軟盤驅動程序設計的改進[J];微電子學與計算機;1989年08期
7 鄧飛;;USB設備驅動程序設計[J];湖南科技學院學報;2006年11期
8 陸二慶;栗方;趙榮陽;;S3C2410TFT-LCD顯示的驅動程序設計[J];電腦開發與應用;2009年03期
9 向涵;;基于Linux平臺PCI設備驅動程序設計[J];電腦知識與技術;2011年09期
10 吳國偉,司錫才,詹磊;硬件設備驅動程序設計與策略[J];應用科技;2001年08期
相關會議論文 前10條
1 汪前;羅勇;曾德;;驅動程序設計和串口監視程序?qū)崿F(xiàn)[A];四川省通信學會2006年學術年會論文集(二)[C];2006年
2 汪前;羅勇;曾德;;驅動程序設計和串口監視程序?qū)崿F(xiàn)[A];四川省通信學會2007年學術年會論文集[C];2007年
3 陳穎;郭栓運;陳文建;;PCI陀螺采集卡及其驅動程序設計[A];2009安捷倫科技節論文集[C];2009年
4 袁魏華;朱海君;喬衛民;敬嵐;;基于Windows2000 WDM模型的PCI數據采集卡驅動程序設計[A];第11屆全國計算機在現代科學技術領域應用學術會議論文集[C];2003年
5 周i,
本文編號:2260044
本文鏈接:http://www.lk138.cn/kejilunwen/dianzigongchenglunwen/2260044.html