發布時間：2018-03-25 03:05

  本文選題：收獲機組　切入點：技術生產率　出處：《東北農業大學》2017年碩士論文

【摘要】：農業收獲機械化是農業現代化的重要技術基礎,對提高農業綜合生產能力、保障農產品有效供給起著十分重要的作用。農業收獲作業是農業生產作業過程中的關鍵環節,選擇適宜的收獲機械在收獲季節完成收獲作業是農業產量取得豐收的重要保障,而收獲機組技術生產率是影響收獲作業的重要因素,因此提高農業收獲機組技術生產率已成為收獲作業的重要組成部分。在綜合分析收獲機組作業時間構成的基礎上,建立收獲機組作業的各類作業時間項目與地塊條件關系的數學模型,建立不同卸糧方式下收獲機組技術生產率與地塊條件關系的數學模型。選擇8種不同功率級的收獲機組作為研究對象,采用跟蹤試驗的方法,測取定距離條件下各種作業機組作業時各類時間消耗。依據收獲機組實際作業的試驗數據進行分析,明確了聯合收獲機作業時間項目構成,建立了純作業、轉彎、卸糧、地塊轉移及調整等時間項目的數學計算模型。根據所建模型和試驗數據,利用MATLAB編程計算,得到不同功率級收獲機組技術生產率隨地塊條件變化的定量規律:當收獲機組的額定功率為50 k W左右,作業幅寬為2-3 m,且糧箱容積為1.4-3 m3時,機組適宜作業的地塊面積至少為2 hm2,地塊長度至少為200 m;當收獲機組的額定功率為80 kW左右,作業幅寬為3-4 m,且糧箱容積為3-4m3時,機組適宜作業的地塊面積至少為2.5 hm2,地塊長度至少為300 m;當收獲機組的額定功率為110 k W左右,作業幅寬為4-4.5 m,且糧箱容積為4-4.5 m3時,機組適宜作業的地塊面積至少為3 hm2,地塊長度至少為400 m;當收獲機組的額定功率為150 k W左右,作業幅寬為4.5-5 m,且糧箱容積為4.5-5 m3時,機組適宜作業的地塊面積至少為3.5 hm2,地塊長度至少為500 m;當收獲機組的額定功率230 k W左右,作業幅寬為7-8 m,且機組糧箱容積為10-12 m3時,機組適宜作業的地塊面積至少為4 hm2,地塊長度至少為600 m。繪制出不同收獲機組技術生產率隨地塊長度、地塊面積的變化規律圖,從而得出各個收獲機組適用的地塊條件。在收獲作業時,選擇合適的收獲機組,可以提高農業機械化技術生產率。同時得到的收獲機組技術生產率率隨地塊條件變化的定量關系,為研究農業機組技術生產率隨地塊條件改變的變化規律提供了理論依據,也為研究機組作業技術指標隨地塊條件變化規律提供基本思想和方法。根據得出的規律指導不同收獲機械與不同地塊條件的匹配,指導農業機器型號選擇,從而提高農業機械生產效率,充分發揮農業機械的使用價值,促進我國農業機械化發展。
[Abstract]:Agricultural harvesting mechanization is an important technical basis for agricultural modernization, which plays a very important role in improving the comprehensive agricultural production capacity and ensuring the effective supply of agricultural products. The selection of suitable harvesting machinery to complete the harvest operation in the harvest season is an important guarantee for the agricultural yield to obtain a good harvest, and the technical productivity of the harvesting unit is an important factor affecting the harvest operation. Therefore, improving the technical productivity of agricultural harvesting units has become an important part of harvesting operations. The mathematical model of the relationship between the time items of various kinds of operations and the land conditions of the harvesting unit is established. A mathematical model of the relationship between the technical productivity of the harvesting unit and the land condition was established under different ways of unloading grain. Eight kinds of harvesting units with different power levels were selected as the research object, and the method of tracking test was adopted. According to the test data of the actual operation of the harvesting unit, the composition of the working time of the combine harvester is determined, and the pure operation, turning and unloading of grain are established. Mathematical calculation model for time items such as land transfer and adjustment. According to the established model and test data, the calculation is programmed by MATLAB. The quantitative rules of the technical productivity of different power level harvesters with plot conditions are obtained: when the rated power of the harvester is about 50 kW, the working width is 2-3 m, and the volume of grain tank is 1.4-3 m3, When the rated power of the harvesting unit is about 80kW, the working width is 3-4 m, and the volume of grain tank is 3-4m3, the area of land suitable for operation is at least 2 hm2 and the length of plot is at least 200m. When the rated power of the harvesting unit is about 110 kW, the working width is 4-4.5 m, and the volume of grain tank is 4-4.5 m3, the area of land suitable for operation is at least 2.5 mm 2, and the length of plot is at least 300 m, and when the rated power of the harvesting unit is about 110 kW, the operating width is 4-4.5 m ~ 3, When the rated power of the harvesting unit is about 150kW, the operating width is 4.5-5m, and the volume of grain tank is 4.5-5m3, the area of land suitable for operation is at least 3 hm2 and the length of plot is at least 400 m. The area of land suitable for operation of the unit is at least 3.5 hm ~ 2 and the length of the plot is at least 500 m. When the rated power of the harvesting unit is about 230 kW, the working width is 7-8 m, and the volume of the unit grain tank is 10-12 m ~ 3, The area of the plot suitable for operation of the unit is at least 4 mm ~ 2, and the length of the plot is at least 600 m. The variation laws of the technical productivity of different harvesting units with the length of the plot and the area of the plot are plotted. Thus, the suitable land conditions for each harvesting unit are obtained. In the harvesting operation, the appropriate harvesting unit is selected, At the same time, the quantitative relationship between the technical productivity rate of the harvesting unit and the plot condition is obtained, which provides a theoretical basis for the study of the variation law of the technical productivity of the agricultural unit with the plot condition. It also provides basic ideas and methods for studying the variation law of unit operation technical indexes with land conditions. According to the obtained rules, it can guide the matching of different harvesting machinery and different plot conditions, and guide the selection of agricultural machinery type. So as to improve the efficiency of agricultural machinery production, give full play to the use value of agricultural machinery, and promote the development of agricultural mechanization in China.
【學位授予單位】：東北農業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F323.3

【參考文獻】

相關期刊論文 前10條

1 辛明金;孔愛菊;鄔立巖;宋玉秋;劉翠紅;崔紅光;任文濤;;高速水稻插秧機作業效率試驗研究[J];沈陽農業大學學報;2015年03期

2 喬金友;張曉丹;王奕嬌;陳海濤;;規�；�大豆產區大豆聯合收獲機綜合評價與優選[J];東北農業大學學報;2014年08期

3 唐秀美;潘瑜春;劉玉;任艷敏;;基于耕地系數和預評價法的耕地整治潛力測算方法[J];農業工程學報;2014年01期

4 奉婷;張鳳榮;李燦;曲衍波;朱鳳凱;;基于耕地質量綜合評價的縣域基本農田空間布局[J];農業工程學報;2014年01期

5 馮應斌;楊慶媛;;轉型期中國農村土地綜合整治重點領域與基本方向[J];農業工程學報;2014年01期

6 易玲;張?jiān)鱿?汪瀟;劉斌;左麗君;趙曉麗;王潔;;近30年中國主要耕地后備資源的時空變化[J];農業工程學報;2013年06期

7 張正峰;楊紅;谷曉坤;;土地整治對平原區及丘陵區田塊利用的影響[J];農業工程學報;2013年03期

8 羅錫文;;對加速我國農業機械化發展的思考[J];農業工程;2011年04期

9 董秀茹;尤明英;王秋兵;;基于土地評價的基本農田劃定方法[J];農業工程學報;2011年04期

10 路婕;李玲;吳克寧;趙華甫;黃勤;;基于農用地分等和土壤環境質量評價的耕地綜合質量評價[J];農業工程學報;2011年02期

相關博士學位論文 前1條

1 何瑞銀;農業機器系統優化模型與水稻種植區典型系統評價的研究[D];南京農業大學;2008年

相關碩士學位論文 前5條

1 張曉丹;農業機械選型決策支持系統設計與實現[D];東北農業大學;2014年

2 朱亞東;黃海農場農業機器選型與配備的研究[D];南京農業大學;2009年

3 石玉梅;兵團國營農場農業機器系統優化配置研究[D];石河子大學;2007年

4 李軍政;洞庭湖區農田動力機器系統的優化配備研究[D];湖南農業大學;2004年

5 朱振寧;大慶農場農業機器系統優化設計研究[D];東北農業大學;2001年

，

本文編號：1661240