發布時間：2018-12-14 21:14

【摘要】：本文以發明問題解決理論(TRIZ)為指導,主要運用TRIZ進化理論的進化法則和進化路線來構建產品的最佳信息結構模型,結合現有鋼筋捆扎機的國內外發展概況,根據所構建的鋼筋捆扎機信息結構模型提出了新型便攜式鋼筋捆扎機創新設計方案,用以解決鋼筋捆扎機現存的絲盤和電池更換頻繁、手持重量超負荷等問題。 為確定產品的創新目標和最終方案,需要有序組織搜集到的產品信息,本文提出了基于TRIZ進化理論的產品最佳信息結構模型的構建方法和流程,結合鋼筋捆扎機產品信息,生成了鋼筋捆扎機最佳信息結構模型,確定了鋼筋捆扎機的創新設計目標。 分別以鋼筋捆扎機專利、設計者和客戶(包括建筑企業和鋼筋捆扎機操作者)為研究對象,應用TRIZ理論對鋼筋捆扎機最佳信息結構模型中的進化路線進行潛能分析,得到進化潛能充足的路線,據該路線提示獲取鋼筋捆扎機最具潛力的創新方案——長距離送絲便攜式鋼筋捆扎機。 對長距離送絲便攜式鋼筋捆扎機創新方案的關鍵技術進行分析,應用TRIZ1141中物理沖突與分離原理分析解決了送絲導管的內徑大小設定問題,探討了送絲與扭轉動作快速切換及四大機構與傳動機構原理性設計問題。 最后針對不同的送絲方式和消費主體創新性地提出了三種結構形式的長距離送絲式鋼筋捆扎機,并對其作了原理性結構分析,在理論上證實了該方案結構形式的合理性與可行性。
[Abstract]:Under the guidance of problem solving theory (TRIZ), this paper mainly uses the evolutionary law and route of TRIZ evolution theory to construct the best information structure model of the product, combined with the domestic and international development situation of the existing steel bar strapping machine. According to the information structure model of steel bar strapping machine, a new innovative design scheme of portable steel bar strapping machine is put forward, which can solve the problems such as frequent replacement of wire disk and battery, overload of handheld weight and so on. In order to determine the innovation goal and final plan of the product, it is necessary to organize the product information collected in an orderly way. In this paper, the method and process of constructing the best information structure model of the product based on TRIZ evolution theory are put forward, and the product information of the steel bar strapping machine is combined. The optimal information structure model of steel bar strapping machine is generated, and the innovative design goal of steel bar strapping machine is determined. Taking the patent of steel bar strapping machine, designers and customers (including construction enterprises and operators of steel bar strapping machine) as research objects, the potential of evolution in the best information structure model of steel bar strapping machine is analyzed by using TRIZ theory. A route with sufficient evolutionary potential is obtained, according to which the most potential innovative solution for obtaining the steel bar strapping machine is the long distance wire feeding portable steel bar strapping machine. This paper analyzes the key technology of the innovative scheme of the portable steel bar strapping machine for long distance wire feeding, and applies the physical conflict and separation principle in TRIZ1141 to analyze and solve the problem of setting the inner diameter of the wire feeding pipe. This paper discusses the fast switching of wire feeding and torsion and the principle design of four mechanisms and transmission mechanism. Finally, according to different wire feeding methods and consumers, three kinds of long distance wire feeding bar strapping machine are put forward, and the principle structure analysis is made. The rationality and feasibility of the structural form of the scheme are proved theoretically.
【學位授予單位】：山東建筑大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB486

【參考文獻】

相關期刊論文 前8條

1 張志遠,何川,張鵬;運用TRIZ理論解決新產品開發中的沖突[J];工程設計學報;2003年04期

2 張路軍;;公理化設計理論與TRIZ集成的設計方法研究[J];工程設計學報;2006年06期

3 張莉娟;朱愛斌;陳渭;謝友柏;;物-場分析及其演變形式——TOP功能分析[J];工程設計學報;2009年03期

4 邵云飛;杜欣;唐小我;;基于6σ/QFD/TRIZ集成的產品創新設計方法[J];系統工程;2011年04期

5 檀潤華,張青華,紀純;TRIZ中技術進化定律、進化路線及應用[J];工業工程與管理;2003年01期

6 王進,童占榮;“U-TIER”全自動鋼筋捆扎機[J];建筑機械;2004年02期

7 臧德江;張明勤;石海龍;李敏;;基于TRIZ物場分析法的立體車庫概念設計[J];起重運輸機械;2009年06期

8 李敏;張明勤;張瑞軍;蘇謙;;TRIZ理論在產品概念設計中的應用研究[J];起重運輸機械;2010年03期

，

本文編號：2379331