發布時間：2018-01-11 08:04

  本文關鍵詞：Morpho蝶翅隱形性特性與仿生結構力學分析及仿生制備的探究　出處：《湖北工業大學》2016年碩士論文　論文類型：學位論文

  更多相關文章： 蝶翅 隱形性特性 力學分析 仿生制備

【摘要】：Morpho蝶翅鱗片表面分布著納米級的樹脊層狀三維精細結構,在垂直方向呈近似相互平行且等間距排列,介質層寬整體呈現一種近似等差數列分布,其內部由空氣介質填充;在水平面方向上,介質層在脊柱兩側錯位排列;沿脊脈方向上,相鄰樹脊結構間距約為50nm,連續若干個這樣的結構構成了一種天然的衍射光柵,這是Morpho蝶翅光學性能的生理基礎。研究發現,這種結構對照射至蝶翅表面的光具很強的波長選擇特性;蝶翅內部隱藏的納米級三維結構對特定波段的光也能產生輻射增強和抑制作用(實際上是蝶翅隱形性能的原理之一)。本文從實驗、仿真、光學、力學原理和微納制備技術等幾方面,對Morpho蝶翅在紅外波段的隱形特性、仿生結構的靜力學分析和仿生結構制備探究做了一定的研究。主要工作包括:1.借助各種精密的光學觀測儀器(如掃描電子顯微鏡(SEM)、透射電子顯微鏡(TEM)等)對天然蝶翅的物理結構做了細致的觀測,蝶翅鱗片的特殊結構使得照射至蝶翅表面的光發生復雜的反射、折射和衍射等綜合效應,這是蝶翅鱗片產生結構色的根源;在明確物理結構的基礎上,搭建光學測試平臺,驗證了蝶翅表面的微納結構在紅外波段具有良好的隱形性能。進一步研究發現Morpho蝶翅的這種多層薄膜間隙結構會因翅層和空氣介質層的折射率不同導致上下兩層發生連續折射-反射-折射等光學反應,這種累加的光學效應是蝶翅隱形性能的生理基礎之一;2.以天然結構為基礎,利用SolidWorks、RsoftCAD等軟件對蝶翅鱗片結構進行優化,建立蝶翅鱗片結構的仿生三維模型(第三方向上的深度不作要求),保留了蝶翅結構基本特征;利用ANSYS對這種結構在承受自重的情況下進行力學分析,探究仿生結構在制備時力學方面的優缺點,并以此提出優化模型,為進一步仿制蝶翅三維結構提供力學方面的參考;3.在明確蝶翅隱形特性成型機理的基礎之上,提出產生隱形特性生理結構的融合性仿生模型,并對其制備做了初步的探索。這些工作的完成對進一步完善蝶翅鱗片結構光學性能研究,突破現有軍用隱形性能發展瓶頸以及實現對蝶翅仿生結構的制備都具有重要的借鑒意義。
[Abstract]:On the surface of Morpho butterfly wing scale, there is a three-dimensional fine structure of tree ridge layer, which is approximately parallel to each other in the vertical direction and equidistant, and the whole dielectric layer width presents an approximate difference sequence distribution. The inner part is filled with air medium; In the horizontal direction, the media layer is dislocated on both sides of the spine. Along the ridge direction, the spacing of adjacent tree ridges is about 50 nm, and a number of such structures form a natural diffraction grating, which is the physiological basis of the optical properties of Morpho butterfly wings. This structure has strong wavelength selective characteristics for the light irradiated to the surface of the butterfly wing. Nano-scale three-dimensional structure hidden inside the butterfly wing can also produce radiation enhancement and suppression effect on the light in a specific band (actually, it is one of the principles of the stealth performance of the butterfly wing.) in this paper, experiments, simulations, optics. The principle of mechanics and micro-nano preparation technology, etc., the stealth characteristics of Morpho butterfly wings in infrared band. The statics analysis of bionic structures and the research on the preparation of bionic structures have been done. The main work includes: 1. With the help of various precise optical observation instruments (such as scanning electron microscope (SEM) SEM). The physical structure of natural butterfly wings has been carefully observed. The special structure of the scales of butterfly wings makes the light reflected from the surface of the wings to be complex. The comprehensive effects such as refraction and diffraction are the root of the structure color of the butterfly wing scales. On the basis of clear physical structure, the optical testing platform is built. It is proved that the micro / nano structure of butterfly fin surface has good stealth performance in infrared band. It is further found that this multilayer film gap structure of Morpho butterfly fin can be guided by the refractive index of wing layer and air medium layer. The optical reactions such as continuous refraction, reflectance and refraction occur in the upper and lower layers. This cumulative optical effect is one of the physiological bases for the stealth performance of butterfly wings. 2. On the basis of natural structure, the flake structure of butterfly wing was optimized by SolidWorks and Rsoft CAD software. The bionic three-dimensional model of the butterfly wing scale structure is established (the depth in the third direction is not required and the basic characteristics of the butterfly wing structure are preserved; The mechanical analysis of this structure under the condition of self-weight is carried out by using ANSYS, and the advantages and disadvantages of the biomimetic structure in the preparation of the biomimetic structure are explored, and the optimization model is put forward. It provides a mechanical reference for the further imitation of the three-dimensional structure of butterfly wings. 3. Based on the understanding of the formation mechanism of the invisible characteristics of butterfly wings, a fusion bionic model is proposed to produce the physiological structure of the stealth characteristics. And the preparation of it has been preliminarily explored. The completion of these works will further improve the optical properties of the structure of butterfly wing scales. Breaking through the bottleneck of the development of military stealth performance and achieving the preparation of butterfly wing bionic structure are of great significance.
【學位授予單位】：湖北工業大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TB17

【相似文獻】

相關期刊論文 前1條

1 А.Вайсиаи;李筱攖;;仿生結構[J];低溫建筑技術;1985年01期

相關會議論文 前1條

1 蘇業旺;季葆華;黃永剛;黃克智;;接觸形狀對生物濕粘附影響的研究[A];北京力學會第14屆學術年會論文集[C];2008年

相關博士學位論文 前1條

1 王傳留;孕鑲金剛石仿生結構耐磨性能的研究[D];吉林大學;2011年

相關碩士學位論文 前4條

1 謝恒峰;Morpho蝶翅隱形性特性與仿生結構力學分析及仿生制備的探究[D];湖北工業大學;2016年

2 陳光明;基于四種耐磨生物體表形貌的仿生結構磨損行為離散元模擬[D];吉林大學;2012年

3 黃文超;超薄懸挑仿生結構的性能研究[D];南京理工大學;2012年

4 高志樺;仿生結構異質復合材料設計、制備及對流體介質控制機制[D];吉林大學;2014年

，

本文編號：1408723