基于空間光測量的光學層析成像系統研究
發布時間：2018-08-08 14:44
【摘要】：擴散光層析成像（Diffuse Optical Tomography，DOT）和熒光層析成像（Fluorescence Diffuse Optical Tomography，，F(xiàn)DOT）技術由于具有良好的特異性、實時性和安全性成為了成像研究的熱點。非接觸式測量可以獲得大量的測量數據，并且避免了接觸產生的耦合誤差，具有廣闊的應用前景。 本文設計并搭建穩態域非接觸式DOT/FDOT系統，采用EMCCD（Electron-Multiplying CCD）作為探測器并輔以待測體旋轉平臺，以增加源-探測點數量，快速獲得大數據集，提高系統的空間分辨率。最終形成的系統包括激光器、EMCCD、電控平移臺/精密電控旋轉臺、濾光輪和計算機。 為了充分發揮該系統獲取大數據集的優勢，將系統中的各個部分進行集成，實現快速測量、數據采集與分析、成像結果實時顯示的自動化控制。采用VisualStudio6.0編寫系統的控制程序，實現在連續測量模式下，DOT/FDOT系統的自動化集成�；诖擞盅芯苛讼到y(tǒng)的校準方法，以減小像差和噪聲對成像的影響。并研制了適用于上述非接觸測量DOT/FDOT用仿體，對搭建的系統進行了DOT及FDOT仿體實驗驗證。在DOT測量中，分別采用不同的源掃描密度、不同吸收系數的異質體及不同中心距（the center-center separation，CCS）的目標體進行了實驗，并結合本組已經發展的適合大測量數據集的DOT/FDOT重建算法進行了圖像重建。 結果表明：在最佳光源密度為16×16時，由該系統所獲得的吸收系數的重建圖像，能基本反映出異質體的形狀、大小和位置；系統可以區分異質體在吸收系數上的差異，在異質體吸收對比度為2的情況下，重建圖像的量化度高達70%；系統完全可以分辨最小距離為CCS=12mm的兩個異質體。在FDOT測量中，分別采用不同的源掃描密度和不同熒光濃度的異質體進行了實驗。結果表明：在最佳光源密度即每周30個點時，該系統所獲得的熒光產率的重建圖像可以基本反映異質體的形狀、大小和位置；且系統可以檢測出不同熒光濃度下的熒光產率變化。該DOT/FDOT系統有望在小動物成像方面發揮作用。
[Abstract]:Diffusion optical tomography (Diffuse Optical) and fluorescence tomography (Fluorescence Diffuse Optical) have become the focus of imaging research due to their good specificity. Non-contact measurement can obtain a lot of measurement data and avoid the coupling error caused by contact, so it has a broad application prospect. In this paper, a steady state non-contact DOT/FDOT system is designed and built. EMCCD (Electron-Multiplying CCD) is used as the detector and a rotating platform is used to increase the number of source-probe points, to obtain big data sets quickly and to improve the spatial resolution of the system. The resulting system consists of a laser EMCCD, an electrically controlled translation platform / a precision electrically controlled rotation table, a filter wheel and a computer. In order to give full play to the advantages of the system in obtaining big data sets, the system integrates all parts of the system to realize the automatic control of rapid measurement, data acquisition and analysis, and real-time display of imaging results. The automatic integration of DOT / FDOT system in continuous measurement mode is realized by programming the control program of the system with VisualStudio6.0. Based on this, the calibration method of the system is studied to reduce the influence of aberration and noise on the imaging. The simulant used in the above non-contact measurement of DOT/FDOT was developed. The system was verified by DOT and FDOT experiments. In the DOT measurement, different source scanning density, different absorption coefficient and different the center-center separation distance were used to carry out the experiments. Combined with the developed DOT/FDOT reconstruction algorithm for large measurement data sets, image reconstruction is carried out. The results show that when the optimum light density is 16 脳 16:00, the reconstructed image of the absorption coefficient obtained by the system can basically reflect the shape, size and location of the heterogeneity, and the system can distinguish the difference of the absorption coefficient of the heterogeneity. The quantization of the reconstructed image is as high as 70 when the absorption contrast of the heterostructure is 2, and the system can fully distinguish the two heterostructures with the minimum distance of CCS=12mm. In the FDOT measurement, different source scanning densities and different fluorescence concentrations were used to carry out the experiment. The results show that the reconstructed image of fluorescence yield obtained by the system can basically reflect the shape, size and location of the heterostructure when the optimal light density is 30 points per week. The system can detect the change of fluorescence yield under different fluorescence concentration. The DOT/FDOT system is expected to play a role in the imaging of small animals.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：R310
本文編號：2172118
[Abstract]:Diffusion optical tomography (Diffuse Optical) and fluorescence tomography (Fluorescence Diffuse Optical) have become the focus of imaging research due to their good specificity. Non-contact measurement can obtain a lot of measurement data and avoid the coupling error caused by contact, so it has a broad application prospect. In this paper, a steady state non-contact DOT/FDOT system is designed and built. EMCCD (Electron-Multiplying CCD) is used as the detector and a rotating platform is used to increase the number of source-probe points, to obtain big data sets quickly and to improve the spatial resolution of the system. The resulting system consists of a laser EMCCD, an electrically controlled translation platform / a precision electrically controlled rotation table, a filter wheel and a computer. In order to give full play to the advantages of the system in obtaining big data sets, the system integrates all parts of the system to realize the automatic control of rapid measurement, data acquisition and analysis, and real-time display of imaging results. The automatic integration of DOT / FDOT system in continuous measurement mode is realized by programming the control program of the system with VisualStudio6.0. Based on this, the calibration method of the system is studied to reduce the influence of aberration and noise on the imaging. The simulant used in the above non-contact measurement of DOT/FDOT was developed. The system was verified by DOT and FDOT experiments. In the DOT measurement, different source scanning density, different absorption coefficient and different the center-center separation distance were used to carry out the experiments. Combined with the developed DOT/FDOT reconstruction algorithm for large measurement data sets, image reconstruction is carried out. The results show that when the optimum light density is 16 脳 16:00, the reconstructed image of the absorption coefficient obtained by the system can basically reflect the shape, size and location of the heterogeneity, and the system can distinguish the difference of the absorption coefficient of the heterogeneity. The quantization of the reconstructed image is as high as 70 when the absorption contrast of the heterostructure is 2, and the system can fully distinguish the two heterostructures with the minimum distance of CCS=12mm. In the FDOT measurement, different source scanning densities and different fluorescence concentrations were used to carry out the experiment. The results show that the reconstructed image of fluorescence yield obtained by the system can basically reflect the shape, size and location of the heterostructure when the optimal light density is 30 points per week. The system can detect the change of fluorescence yield under different fluorescence concentration. The DOT/FDOT system is expected to play a role in the imaging of small animals.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：R310
【參考文獻】
相關期刊論文 前6條
1 楊芳;馬藝聞;高峰;趙會娟;;一種基于多級小波域分解的時域擴散光學層析成像方法的研究[J];光學學報;2008年08期
2 秦轉萍;趙會娟;周曉青;楊彥雙;高峰;;有效探測區域的內窺式漫射層析成像圖像重構算法[J];光學學報;2011年11期
3 高峰,牛憨笨;光學CT二維正向問題有限元法數值模擬的研究[J];光學學報;1997年02期
4 劉立新,屈軍樂,林子揚,陳丹妮,郭寶平,牛憨笨;熒光壽命成像及其在生物醫學中的應用[J];深圳大學學報;2005年02期
5 段帷;趙昭旺;;基于EMCCD的成像系統的構建[J];天文研究與技術.國家天文臺臺刊;2006年04期
6 王瑜;;乳腺癌的早期診斷方法[J];中國臨床醫生;2011年07期
相關博士學位論文 前1條
1 張麗敏;時域熒光擴散光層析的基本理論與實驗研究[D];天津大學;2009年
本文編號：2172118
本文鏈接：http://www.lk138.cn/yixuelunwen/swyx/2172118.html
最近更新
教材專著
