發布時間：2018-05-22 15:39

  本文選題：CCD + FPGA　； 參考：《東北師大學報(自然科學版)》2017年04期

【摘要】：設計了一種基于CCD的實時成像與微小尺寸測量系統,該系統由CCD攝像頭、視頻解碼芯片、FPGA、USB芯片和上位機組成.用FPGA控制視頻解碼芯片獲取CCD攝像頭采集的光學信號,通過USB傳給上位機,利用多線程技術實現控制命令的發送、圖像數據的接收、處理和顯示,以及微小尺寸的測量.結果表明:經過多次測量實驗得到系統誤差不超過3μm,滿足測量精度要求;通過選用不同分辨率的CCD,可以實現不同精度的微小尺寸測量.此外還對雙棱鏡干涉實驗所形成的干涉條紋間距進行了測量,驗證了系統的功能.
[Abstract]:A real time imaging and micro size measurement system based on CCD is designed. The system is composed of CCD camera, video decoder chip and PC. The optical signal collected by CCD camera is obtained by FPGA control video decoding chip, and transmitted to the host computer by USB. The multi-thread technology is used to realize the sending of control command, the receiving, processing and displaying of image data, and the measurement of small size. The experimental results show that the system error is less than 3 渭 m, which can meet the requirement of measurement precision, and the micro size measurement with different resolution can be realized by using different resolution CCDs. In addition, the spacing of interference fringes formed by the biprism interference experiment is measured, and the function of the system is verified.
【作者單位】： 東北師范大學物理學院;
【基金】：國家自然科學基金資助項目(21227008) 吉林省科技發展計劃項目(20130102028JC)
【分類號】：TP274

【相似文獻】

相關期刊論文 前10條

1 陳q，

本文編號：1922668