M開發區套損因素及力學機理研究
[Abstract]:Since 2003, the casing damage problem has become more and more serious in M development zone, and the economic loss caused by casing damage is quite huge, which has a great impact on oilfield development. At the same time, the overhauling of casing damage well requires high cost, so we should analyze and study the factors of casing damage in this area. From the current situation of casing failure in this area, the characteristics of the plane distribution of casing damage well point and the longitudinal layer distribution of casing damage point have been basically understood. The cause of casing damage is only statistically analyzed, and further research is carried out. The purpose of this paper is to find out the main causes of casing damage in M development zone, to understand and understand the mechanism of casing damage, and to formulate targeted casing damage prevention measures, so that comprehensive treatment of casing damage wells can be carried out in order to reduce the cost of oil field maintenance. It is of great significance to slow down casing damage speed, adjust oilfield development and make oil field produce stable and efficient for a long time. Based on the analysis of geological and development factors, the main research content of this paper is based on the theory of rock mechanics, combined with the change of underground pressure caused by injection and production of oil and water wells, and finally the change of stress and strain of rock formation. To explain the source of casing failure in oil-water wells; Finally, a large number of relevant experiments are conducted to demonstrate this argument. In this paper, the development history of M development zone is summarized and analyzed firstly. Taking the field data as the basic condition, the relevant data are obtained through relevant experiments, and the characteristics of casing damage are analyzed as a whole, and the relevant geological knowledge is used. The related theories of development knowledge and rock mechanics are combined with practical production in order to help establish casing protection system in oil field.
【學位授予單位】:東北石油大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TE931.2
【相似文獻】
相關期刊論文 前10條
1 袁昭;于家義;劉永軍;梁文發;陶林本;;吐哈油田套損井現狀調查及治理思路[J];吐哈油氣;2007年02期
2 任麗華;王鳳祥;竇守進;劉麗;鄭剛;紀會和;劉建東;;大港棗園油田套損規律初步認識[J];鉆采工藝;2008年03期
3 林報欽;李振銀;谷鳳賢;朱鐵軍;廖作才;;淺層稠油開發區套損原因分析及對策(下)[J];科技創新導報;2008年14期
4 陳義發;;井樓油田套損機理研究與防治對策[J];石油地質與工程;2011年01期
5 陳斌;;套損井治理技術推廣及應用[J];中國石油和化工標準與質量;2011年02期
6 李軍剛;張文斌;石海霞;朱亞兵;謝平仲;;七個泉油田套損機理研究[J];遼寧化工;2012年08期
7 董德貴;劉士軍;李龍飛;;套損井特征與治理方法[J];科協論壇(下半月);2013年07期
8 王鳳祥;谷雪麗;鄭忠強;段沛海;;小集油田套損基本特征研究[J];中國石油和化工標準與質量;2013年17期
9 丁小衛;;P區塊套損井的發現與治理探究[J];中國石油和化工標準與質量;2014年01期
10 李峗;;套損井損壞機理研究[J];中國石油和化工標準與質量;2014年06期
相關會議論文 前7條
1 李勇;侯存億;;嚴重套損井修復工具研制及新工藝研究[A];創新驅動,,加快戰略性新興產業發展——吉林省第七屆科學技術學術年會論文集(上)[C];2012年
2 孔慶征;;大慶油田某區成片套損機制的初步分析[A];第四屆全國構造物理、第二屆全國高溫高壓聯合學術討論會論文摘要[C];1989年
3 王衛忠;賀海洲;韓生軍;費二戰;;油房莊油田套損機理分析及治理技術應用[A];石化產業科技創新與可持續發展——寧夏第五屆青年科學家論壇論文集[C];2009年
4 劉俊琴;徐建新;孫麗慧;;寧夏油田套損井現狀及治理工藝[A];低碳經濟促進石化產業科技創新與發展——第六屆寧夏青年科學家論壇論文集[C];2010年
5 羅軍;敬登峰;李清波;蘇寧軍;楊國強;;白于山區套損現狀及治理對策分析[A];創新·質量·低碳·可持續發展——第十屆寧夏青年科學家論壇石化專題論壇論文集[C];2014年
6 劉性全;徐海;畢傳萍;劉紹軒;;應用流固耦合理論研究套損機理[A];第九屆全國滲流力學學術討論會論文集(一)[C];2007年
7 田育紅;于波;劉秀華;張宏崗;楊永剛;李曉明;;油田套損井治理技術研究及應用[A];低碳經濟促進石化產業科技創新與發展——第六屆寧夏青年科學家論壇論文集[C];2010年
相關重要報紙文章 前10條
1 通訊員 朱立英;采油七廠分區塊個性化治理套損井[N];大慶日報;2008年
2 通訊員 鐘林榮;大慶采四全方位治理套損井[N];中國石油報;2002年
3 李雪梅;大慶采油七廠連續三年套損井數比例控制在1%以內[N];中國石油報;2008年
4 雷茜;套損井修復成功率100%[N];中國石化報;2009年
5 記者 趙士振 通訊員 傅深洋;套損井治理破解穩產難題[N];中國石化報;2011年
6 沙文潔 曹u! 王利國;新工藝封治套損井[N];中國石化報;2011年
7 本報記者 張幸福;診治“老病號”讓原油“顆粒歸倉”[N];大慶日報;2011年
8 記者 王志田 通訊員 鐘林榮;大慶突破套損井分層壓裂禁區實現創效7000余萬元[N];中國石油報;2005年
9 周宏 張軍;修復套損井小套管管柱獲國家實用新型專利[N];中國石化報;2009年
10 通訊員 張彥芳;發力“老大難” 單井效益增[N];中國石油報;2012年
相關博士學位論文 前8條
1 闕源;套損井綜合治理保障大慶油田可持續發展研究[D];中國地質大學(北京);2009年
2 何秀清;套損井修復壓裂過程力學分析及其應用[D];大慶石油學院;2006年
3 姜民政;套損井修復過程中修復力的確定及水泥環損傷機理研究[D];哈爾濱工程大學;2003年
4 杜永軍;套損的影響因素地層的流體壓力與地應力研究[D];哈爾濱工程大學;2005年
5 韓修廷;大慶油田套管損壞機理研究[D];哈爾濱工程大學;2001年
6 劉開緒;油田套損磁測應力檢測技術研究[D];東北石油大學;2016年
7 孫磉礅;孤東油田稠油熱采井套損機理及防控措施研究[D];中南大學;2010年
8 賈江鴻;油田開發過程中套管損壞預報方法及應用研究[D];中國石油大學;2009年
相關碩士學位論文 前10條
1 閆婧瀟;M開發區套損因素及力學機理研究[D];東北石油大學;2017年
2 張守華;無通道套損井打通道及報廢技術[D];東北石油大學;2015年
3 劉鳴東;大慶杏北開發區過渡帶薩Ⅰ~薩Ⅱ夾層成片套損機理研究[D];東北石油大學;2016年
4 段貴權;套損修復井精細分層注水配套工藝研究[D];東北石油大學;2016年
5 余雄風;基于多因素耦合的熱采井套損影響及防治研究[D];西南石油大學;2016年
6 陳宗先;南二區西部構造復雜區套損防控注入壓力界限研究[D];武漢輕工大學;2016年
7 朱君;杏樹崗油田南部杏南開發區套損成因及防治方法研究[D];浙江大學;2008年
8 李連平;杏北地區嫩二段標準層成片套損與地質特征關系研究[D];大慶石油學院;2008年
9 張廣福;杏北油田套損認識及防治研究[D];大慶石油大學;2006年
10 李清忠;大慶油田嫩二段底部成片套損地質因素研究[D];大慶石油大學;2006年
本文編號:2312549
本文鏈接:http://www.lk138.cn/kejilunwen/shiyounenyuanlunwen/2312549.html