發布時間：2018-06-14 12:27

  本文選題：集群 + 節能優化��； 參考：《華中科技大學》2013年碩士論文

【摘要】：計算機集群的廣泛應用給人們帶來方便的同時，也帶來了能耗問題，如何有效地利用能源，降低不必要的能耗已成為一個迫切需要解決的關鍵問題。作為目前最熱門的海量數據處理框架，Hadoop被部署到越來越多的集群上。但是Hadoop卻一直沒有引入節能的特性，因此對Hadoop集群的節能優化技術進行研究是非常有必要的。 基于現有的研究成果，結合Hadoop本身的機架感知特性和副本存放策略，提出了根據集群的負載情況調整集群規模來改善集群能源利用率的節能方案。節能方案為集群添加兩個功能模塊：集群負載監控模塊和集群規模調整模塊。負載監控模塊負責監控集群的利用率，當監控到利用率過高或過低時會通知集群規模調整模塊對集群規模進行調整。集群規模調整模塊包含兩個重要的算法：退役節點算法和重用節點算法，集群利用率過低時會啟動退役節點算法，通過退役節點來減少集群中活躍節點數量，，以提高集群能源利用率，集群利用率過高時會啟動重用節點算法來增加集群活躍節點數量，以提高集群對任務請求的響應速度。 通過使用GridSim工具包來對系統進行仿真實驗，實驗中對比了未使用節能策略的集群狀態和應用節能策略的集群狀態，驗證了退役節點算法和重用節點算法確實能夠根據集群的負載來改變集群的規模，實驗結果表明在算法執行過程中可以使集群節能30%以上。
[Abstract]:The extensive application of computer cluster brings people convenience and energy consumption. How to use energy effectively and reduce unnecessary energy consumption has become a key problem that needs to be solved urgently. Hadoop, the most popular mass data processing framework, is deployed to more and more clusters. However, Hadoop has not introduced the characteristics of energy saving, so it is necessary to study the energy-saving optimization technology of Hadoop cluster. Based on the existing research results, combined with Hadoop's own rack perception characteristics and replica storage strategy, an energy saving scheme is proposed to improve cluster energy efficiency by adjusting cluster scale according to the load situation of the cluster. The energy saving scheme adds two functional modules to the cluster: the cluster load monitoring module and the cluster scale adjustment module. The load monitoring module is responsible for monitoring the utilization rate of the cluster. When monitoring the utilization rate is too high or too low, the cluster size adjustment module will be notified to adjust the cluster size. The cluster scale adjustment module includes two important algorithms: the decommissioned node algorithm and the reuse node algorithm. When the cluster utilization is too low, the decommissioned node algorithm is started, and the number of active nodes in the cluster is reduced by decommissioned nodes. In order to improve the cluster energy utilization, if the cluster utilization is too high, the reuse node algorithm will be started to increase the number of active nodes in the cluster, so as to improve the response speed of the cluster to the task request. By using the GridSim toolkit to simulate the system, the cluster state without energy saving strategy and the cluster state with energy saving strategy are compared in the experiment. It is verified that the retired node algorithm and the reuse node algorithm can change the scale of the cluster according to the load of the cluster. The experimental results show that the algorithm can save more than 30% energy in the process of implementing the algorithm.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP333

【參考文獻】

相關期刊論文 前3條

1 劉斌;楊堅;趙宇;;基于在線負載預測的動態集群節能配置策略[J];計算機工程;2010年24期

2 王軍;馮鈴;薛文偉;;服務器與集群系統節能技術研究[J];軟件;2011年02期

3 谷立靜;周伏秋;孟輝;;我國數據中心能耗及能效水平研究[J];中國能源;2010年11期

本文編號：2017378