本文選題：MSP430單片機 + 氣壓傳感器��； 參考：《曲阜師范大學》2013年碩士論文

【摘要】：隨著人們生活水平的日益提高，運動健身越來越受到人們的重視。由于時間和空間的限制，健身房成了越來越多城市人民的健身選擇。單一功能的健身器材已不能滿足人們的健身需要，基于飛速發展的計算機技術對健身器材的不斷改進與創新也就成了一種必然趨勢。現有的的搏擊訓練器材在測試過程中僅用于測試人的拳擊力度大小，測試功能單一。本設計是基于MSP430的搏擊訓練器綜合測試系統，功能多，可以完成對人的出拳反應時間，出拳速度和拳擊力度大小的測量。彌補了現有搏擊訓練器的不足，為使用者提供了一種綜合多功能鍛煉和測試平臺。 搏擊訓練器綜合測試系統主要由MSP430單片機、HC-SR04超聲波傳感器模塊、MPS20N1000D-S氣壓傳感器模塊、SC63X75汽缸和12864液晶模塊組成。MSP430單片機定時器完成反應時間的測量；超聲波傳感器配合定時器完成速度的測量；拳力測量由氣壓傳感器完成；液晶用于顯示測量數據。除此之外，，搏擊訓練器還通過nRF24L01無線通信模塊與上位機相連，將用戶測試信息上傳，用計算機以數據庫的形式進行保存、顯示與管理。本文首先介紹了設計中用到的軟件和硬件，再詳細闡述了硬件電路的設計和軟件程序流程。其中對傳感器采集信息過程中可能出現的誤差進行了分析與調整。通過搏擊訓練器的優化設置方案，合理選材，合理設計工作流程，做到了鍛煉和測試的全方位關懷。
[Abstract]:With the improvement of people's living standard, people pay more and more attention to sports and fitness. Due to time and space constraints, gym has become a fitness choice for more and more urban people. The single function fitness equipment can not meet the needs of people's fitness. The continuous improvement and innovation of fitness equipment based on the rapid development of computer technology has become an inevitable trend. The existing combat training equipment is only used to test the strength of boxing in the process of testing, the test function is single. This design is based on MSP430 combat training comprehensive testing system, with many functions, can complete the measurement of people's reaction time, boxing speed and boxing strength. To make up for the deficiency of the existing combat training equipment, This system is composed of MSP430 single chip microcomputer, HC-SR04 ultrasonic sensor module, MPS20N1000D-S pressure sensor module, SC63X75 cylinder and 12864 liquid crystal module. The timer of the chip machine completed the measurement of the reaction time; Ultrasonic sensor with timer to complete the measurement of speed; fist force measurement by the pressure sensor; liquid crystal used to display measurement data. In addition, the combat trainer is connected to the upper computer through the nRF24L01 wireless communication module. The user test information is uploaded and stored by computer in the form of database, which is displayed and managed. This paper first introduces the software and hardware used in the design, and then describes the design of the hardware circuit and the software program flow in detail. The possible errors in the process of collecting information by sensors are analyzed and adjusted. Through the optimized setting scheme of fight training device, reasonable material selection and reasonable design of work flow, the omnibearing care of exercise and test is achieved.
【學位授予單位】：曲阜師范大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP368.1;TP212

【參考文獻】

相關期刊論文 前10條

1 蘇煒,龔壁建,潘笑;超聲波測距誤差分析[J];傳感器技術;2004年06期

2 楊雷,盧廣建,范保松;氣壓傳感器信號采集與非線性校正[J];傳感器技術;2005年09期

3 孫存英;俞嘉隆;喬衛平;;超聲波探測技術原理實驗[J];大學物理實驗;2010年01期

4 蔣正義,朱善安,韓東芳;基于MSP430和nRF401的無線自動抄表系統[J];電子技術應用;2004年11期

5 陳麗娟;常丹華;;基于nRF2401芯片的無線數據通信[J];電子器件;2006年01期

6 馬帥旗;史忠科;;基于氣壓傳感器的高程測量系統設計[J];測控技術;2010年12期

7 祝敏;;超聲波測距誤差分析及修正方法[J];計量與測試技術;2009年02期

8 馬金祥;何一鳴;;基于nRF905模塊的AT89S單片機無線收發系統設計[J];通信技術;2009年02期

9 蘇維嘉;王旭輝;;基于MSP430單片機的數據采集系統[J];現代電子技術;2007年23期

10 吳平,龔彬,丁鐵夫;液晶顯示模塊和MSP430單片機在顯示終端上的應用[J];液晶與顯示;2003年06期

本文編號：2008439