發布時間：2018-06-10 20:52

  本文選題：測距系統 + 放大電路�。� 參考：《河北工業大學》2012年碩士論文

【摘要】：液位測量技術在工業生產中占有重要的地位，隨著工業水平的不斷發展，測量技術逐漸由手動變?yōu)樽詣樱�由傳統的不科學變?yōu)楦�具有科學性可依的測量方法。本文主要介紹測距系統的單片機控制模塊，4-20mA電流轉換模塊，電源模塊，太陽能供電模塊，液晶顯示模塊，升壓電路模塊，三級放大電路模塊，溫度補償系統模塊，KALMAN算法數據處理等幾大關鍵核心模塊。 首先完成單片機控制模塊的設計，，控制模塊主要負責計算測距系統到被測液面的距離。24V電源模塊是將輸入的24V電壓轉換成電路需要的電壓值。太陽能供電模塊主要目的是解決偏遠地區無法正常供電時的電池供電情況。液晶顯示模塊主要方便現場對液位測距系統參數的設置，及現場采集到的數值與中控室數據的對照。其次完成升壓模塊的電路設計，將系統產生的電壓進行大幅度的提升激勵探頭產生用于測量的超聲波，超聲波經過被測液面后，返回的微弱波經過三級放大電路放大還原后送入單片機做進一步計算。在計算過程中使用溫度補償系統采集到的數值對數據進行校正。最終使用Kalman算法對測量的數值進行進一步的精確分析，得出一個精度相對較高的液位高度值，通過4-20mA電流轉換模塊將高度數值轉化成電流值傳送至中控室進行液位監測。基于超聲波的測距系統的超聲波液位計具有成本低，技術要求不高，工作穩定性強，易于操作等幾個方面的特點，被廣泛應用于測量的各個領域。但其普遍存在受環境溫度影響大、精度不高幾個方面的缺點。因此研究帶自身校準功能的超聲波液位計具有重要意義。 課題對超聲波液位計進行理論分析，硬件結構系統設計，Kalman算法數據分析，整機調試，達到預期目標。實現了對液位環境的低誤差測量，具有一定的使用價值。
[Abstract]:Liquid level measurement technology plays an important role in industrial production. With the continuous development of industrial level, the measurement technology is gradually changed from manual to automatic, from traditional unscientific to more scientific. This paper mainly introduces the SCM control module, 4-20mA current conversion module, power module, the sun. The power supply module, the LCD module, the boost circuit module, the three stage amplifier module, the temperature compensation system module, the KALMAN algorithm data processing and other key core modules.
First of all, the design of the MCU control module is completed. The control module is mainly responsible for calculating the distance between the distance measuring system and the measured level. The.24V power module is the voltage value that converts the input 24V voltage to the circuit. The main purpose of the solar power supply module is to solve the battery power supply when the remote area is unable to supply the normal power. The LCD module is the main purpose of the solar power supply module. It is mainly convenient to set up the parameters of the liquid level distance measuring system, and compare the data collected in the field with the data of the control room. Secondly, the circuit design of the lift module is completed, and the voltage generated by the system is greatly enhanced by the excitation probe for measuring ultrasonic wave. After the ultrasonic wave passes the measured surface, the return of the weak wave passes three. The level magnifying circuit is amplified and reduced to the single chip microcomputer for further calculation. In the process of calculation, the data collected by the temperature compensation system are corrected. Finally, the Kalman algorithm is used to further analyze the measured values, and a relatively high level of level of liquid level is obtained, and the 4-20mA current conversion module is used. The ultrasonic liquid level meter based on ultrasonic ranging system has the characteristics of low cost, low technical requirement, strong working stability, easy to operate and so on, which is widely used in various fields of measurement, but it is widely influenced by ambient temperature and fine. Therefore, it is of great significance to study the ultrasonic level gauge with its own calibration function.
In this paper, the theoretical analysis of the ultrasonic liquid level meter, the design of the hardware structure system, the data analysis of the Kalman algorithm, the whole machine debugging, have reached the expected goal, and the low error measurement for the liquid level environment has been realized, which has a certain value of use.
【學位授予單位】：河北工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP274;TP368.12

【參考文獻】

相關期刊論文 前4條

1 唐長文,何捷,菅洪彥,閔昊;精確的1.08GHz CMOS電感電容壓控振蕩器(英文)[J];半導體學報;2005年05期

2 張順;;火電廠電除塵及除灰系統中的料位計選用[J];湖北電力;2011年02期

3 李俊杰;朱金武;;便攜式大容量太陽能鋰離子電池充電器的設計[J];天津職業院校聯合學報;2011年05期

4 趙斌;陳迪平;曾健平;劉文用;;低相位噪聲低功耗LC壓控振蕩器的設計[J];微計算機信息;2008年02期

相關碩士學位論文 前10條

1 楊升;智能電氣定位器的HART通訊接口開發[D];杭州電子科技大學;2011年

2 郟東耀;基于現場總線技術的瓦斯檢測及報警系統[D];鄭州大學;2002年

3 崔志崗;基于HART協議的電磁流量計及手操器開發[D];天津工業大學;2006年

4 胡建勛;便攜式多功能互感器測量儀的設計實現[D];華中科技大學;2006年

5 賈仁敏;基于HART協議智能壓力變送器的研究[D];大連海事大學;2008年

6 王磊;前置腔體輻射測溫的研究[D];北方工業大學;2008年

7 貝天寶;新型鋰電池LED礦燈電控系統的研究[D];廣東工業大學;2008年

8 武強;wMPS測量系統模型建立與仿真分析[D];天津大學;2008年

9 張凌華;基于MSP430單片機的氣體渦輪流量計設計[D];河北工業大學;2008年

10 張凌志;基于MSP430單片機的便攜式動態心電監護儀研制[D];中南大學;2009年

本文編號：2004597