本文選題：軋后穿水 + CrMnTiH鋼��； 參考：《熱加工工藝》2017年21期

【摘要】：利用熱模擬試驗機研究了軋后穿水冷卻過程中奧氏體晶粒尺寸和形態的變化,以及對組織轉變的影響機理。結果表明,對于終軋溫度≥950℃的軋材,穿水對組織轉變的作用為抑制再結晶晶粒的粗化,增加鐵素體相變的形核位置,促進鐵素體相變,從而抑制貝氏體相變。對于終軋溫度≤900℃的軋材,穿水對組織轉變的作用為抑制軋材的再結晶,保留形變儲能,提高鐵素體形核率,促進鐵素體相變,從而抑制貝氏體相變。通過以上兩種機制,在850~1000℃軋后穿水都能明顯促進鐵素體相變,抑制貝氏體相變。
[Abstract]:The changes in grain size and morphology of austenite and the mechanism of its influence on microstructure transformation during the process of water cooling after rolling were studied by means of thermal simulation test machine. The results show that the effect of water on microstructure transformation is to inhibit the coarsening of recrystallized grains, increase the nucleation position of ferrite transformation, and promote ferrite transformation, thus restraining the bainite transformation. For the rolled materials with finishing rolling temperature 鈮，

本文編號：1911681