本文選題：AZ鎂合金 + 軋制　； 參考：《稀有金屬材料與工程》2017年05期

【摘要】：研究了不同軋制變形量和軋制速度對AZ31鎂合金板材微觀組織和力學性能的影響。軋制變形可顯著細化AZ31鎂合金板材的晶粒尺寸并提高其綜合力學性能。當軋制速度為5 m/min,軋制變形量為50%時,板材平均晶粒尺寸最細可達到9μm,其抗拉強度、屈服強度和延伸率分別提高到280、180 MPa和30%以上,同時探討了AZ31鎂合金屈服強度與晶粒大小之間的關系。在大量AZ31鎂合金軋制文獻數據和本實驗一系列數據的基礎上,對比分析了不同軋制工藝對AZ31鎂合金綜合力學性能的影響。研究表明,本實驗所采用軋制工藝可顯著提高AZ31鎂合金板材的綜合力學性能,同時降低板材軋向(RD)和橫向(TD)的各向異性。
[Abstract]:The effect of different rolling deformation amount and rolling speed on Microstructure and mechanical properties of AZ31 magnesium alloy sheet is studied. Rolling deformation can significantly refine the grain size of AZ31 magnesium alloy sheet and improve its comprehensive mechanical properties. When the rolling speed is 5 m/min and the rolling deformation amount is 50%, the average grain size of the plate can reach 9 m, and its resistance is up to 9. The tensile strength, yield strength and elongation increase to 280180 MPa and 30% respectively. The relationship between yield strength and grain size of AZ31 magnesium alloy is discussed. On the basis of a large number of AZ31 magnesium alloy rolling documents and a series of data in this experiment, the effects of different rolling processes on the comprehensive mechanical properties of AZ31 magnesium alloys are compared and analyzed. The study shows that the rolling process in this experiment can improve the comprehensive mechanical properties of AZ31 magnesium alloy sheet and reduce the anisotropy of sheet rolling (RD) and transverse (TD).

【作者單位】： 西安歐中材料科技有限公司;哈爾濱工業大學;
【分類號】：TG339

【相似文獻】

相關期刊論文 前10條

1 林大超;;軋制變形的極限模擬技術[J];四川冶金;1991年04期

2 鄧運來,張新明,唐建國,劉瑛,陳志永,周卓平;多晶純鋁軋制變形晶粒局部取向的演變[J];金屬學報;2005年05期

3 程懿麒;;軋制變形抗力的計算[J];科技資訊;2010年10期

4 李廣艷;;特殊斷面寬鋼帶軋制變形過程數值模擬仿真及分析[J];山東冶金;2012年05期

5 張新明;張，

本文編號：1848421