本文選題：環保砂 + 綠色鑄造��； 參考：《東華大學》2017年碩士論文

【摘要】：砂型鑄造是鑄造工藝的主要方法,其中濕型砂適用范圍最廣,耗用量最大。國內外廣泛使用的煤粉濕型砂廢砂排放量大,污染環境嚴重;鑄造生產中產生的有毒、有害氣體既污染環境又影響工人健康。因此,實現砂型鑄造的綠色清潔生產對實現“綠色鑄造”具有極其重要的意義。東華大學與企業合作,研究開發了一種環保型黃壤土砂,該環保砂顏色呈土黃色,全由無機材料組成。使用這種型砂進行鑄造生產,車間干凈,不會排放有害氣體危害工人健康,且舊砂不會污染環境。環保砂的常溫濕壓強度高,可用做型(芯)砂材料。本文主要介紹作者對環保砂的鑄造回用性能和熱物理性能進行研究。首先,研究了熱作用對環保型黃壤土砂鑄造性能的影響。測試研究環保砂和煤粉砂在不同溫度下多次燒損后濕壓強度和透氣性的變化,使用熱分析儀對環保型砂進行差熱分析及熱重分析,使用熱臺偏光顯微鏡觀察型砂在升溫過程中形態變化。通過分析其DSC-TG曲線及高溫形態變化,解釋型砂在不同溫度燒損后濕壓強度和透氣性的變化。研究結果表明,隨燒損溫度上升,環保砂強度下降趨勢比煤粉砂緩和的多,適應溫度范圍更寬,耐燒損能力更強,環保砂回用性更好。其次,通過向環保型黃壤土砂添加少量添加劑,探究環保砂的抗壓強度、殘留強度、高溫?zé)釅簭?qiáng)度以及存放穩定性的變化,以期得到性能更加完善的環保砂。研究結果表明,環保砂加入適量添加劑能大幅提升型砂的抗壓強度和高溫?zé)釅簭?qiáng)度,殘留強度雖有一定提升但仍在合理范圍內,潰散性很好;熱膨脹性能降低,能有效防止鑄件變形,同時良好的存放穩定性能夠使環保砂在造型之前保持良好的性能。然后,對環保型黃壤土砂的熱導率、比熱容、導溫系數、和高溫?zé)崤蛎浶缘葻嵛锢硇阅苓M(jìn)行系統的測試研究,并和傳統煤粉濕型砂進行對比,進一步認識環保砂的熱物性特點。之后對環保砂添加HB粘結劑,研究HB粘結劑含量對環保砂熱物性的影響。研究結果表明,環保砂的熱導率、比熱容高于煤粉砂,導溫系數略低于煤粉砂,高溫?zé)崤蛎浶阅芑疽恢�。適量HB粘結劑的加入可有效降低環保砂的熱導率、熱膨脹率,同時提高其比熱容和導溫系數。環保砂這些優異的熱物理性能使鑄件在鑄型中冷卻凝固時能更好的保證質量。最后,為了驗證環保型黃壤土砂用做型(芯)砂材料對鑄件質量和鑄造缺陷的影響,對環保砂進行了澆注驗證并與煤粉砂進行了對比,從鑄件的粘砂和表面粗糙度兩個方面來考察環保型黃壤土砂的適用性。實驗結果表明:環保型黃壤土砂鑄件表面能形成易剝離的燒結殼,輕敲即可脫落,鑄件表面光潔、細膩,鑄件質量好。研究工作對深入了解環保型黃壤土砂的循環使用性能,控制生產鑄件成本,推行綠色環保鑄造生產工藝,具有基礎性的指導作用。
[Abstract]:Sand mold casting is the main method of casting technology, in which wet sand is the most widely used and the consumption is the largest. The waste sand of pulverized coal powder is widely used at home and abroad, which pollutes the environment seriously, and the poisonous and harmful gases produced in foundry not only pollute the environment but also affect the health of workers. Therefore, it is very important to realize green cleaner production of sand mold casting. A kind of environmental friendly yellow loam sand has been developed by Donghua University in collaboration with enterprises. The environmental friendly sand is khaki-colored and composed of inorganic materials. The molding sand is used for foundry production, the workshop is clean, the harmful gas will not be emitted and the old sand will not pollute the environment. Environmental-friendly sand has high wet compression strength at room temperature and can be used as core sand material. This paper mainly introduces the author's research on the foundry reusability and thermophysical properties of environmentally friendly sand. Firstly, the effect of thermal action on casting properties of environmental friendly yellow loam sand was studied. The changes of wet compression strength and permeability of environmental friendly sand and pulverized coal sand after repeated burning at different temperatures were studied. The differential thermal analysis and thermogravimetric analysis of environmental friendly sand were carried out by using thermal analyzer. The morphologic changes of molding sand during heating process were observed by means of hot platform polarizing microscope. By analyzing the DSC-TG curve and the change of high temperature morphology, the changes of wet compression strength and permeability of molding sand after burning at different temperatures were explained. The results show that with the increase of burning temperature, the intensity of environmental friendly sand decreases much more than that of pulverized coal sand, and the temperature range is wider, the ability of resistance to burning damage is stronger, and the recycling ability of environmental friendly sand is better than that of pulverized coal sand. Secondly, by adding a small amount of additives to the environmental friendly yellow loam sand, the changes of compressive strength, residual strength, high temperature hot pressing strength and storage stability of the environmental friendly sand were investigated, in order to obtain more perfect environmental friendly sand. The results show that the compressive strength and high temperature hot compression strength of molding sand can be greatly improved by adding appropriate additives to environmental friendly sand, and the residual strength is still within a reasonable range, the collapsibility is very good, and the thermal expansion property is reduced. Can effectively prevent casting deformation, and good storage stability can make environmental protection sand before molding to maintain good performance. Then, the thermal physical properties such as thermal conductivity, specific heat capacity, thermal conductivity coefficient and high temperature thermal expansion of environmental friendly yellow loam sand are systematically tested and studied, and compared with traditional coal powder wet molding sand, the characteristics of thermo-physical properties of environment-friendly sand are further understood. The effect of HB binder content on thermal properties of environmentally friendly sand was studied. The results show that the thermal conductivity, specific heat capacity and thermal conductivity of environmentally friendly sand are higher than those of pulverized coal sand, and the thermal conductivity coefficient is slightly lower than that of pulverized coal sand, and the thermal expansion performance at high temperature is basically the same. The addition of appropriate HB binder can effectively reduce the thermal conductivity, thermal expansion rate, and increase the specific heat capacity and thermal conductivity of environmentally friendly sand. Environmental friendly sand, such as excellent thermal physical properties, can better ensure the quality of castings during cooling and solidification. Finally, in order to verify the effect of environmental friendly yellow loam sand used as mold (core) sand material on casting quality and casting defects, the environmental protection sand was tested and compared with pulverized coal sand. The applicability of environmental friendly yellow loam sand was investigated from two aspects of sand and surface roughness of castings. The experimental results show that the surface of environmental friendly yellow loam sand castings can form easily peelable sintered shells, which can be shedded by tapping lightly. The casting surface is smooth and fine, and the quality of castings is good. The research work has the basic guiding function to understand the recycling performance of the environmental protection yellow loam sand, to control the production cost of the castings, and to carry out the green environmental protection casting production process.
【學位授予單位】：東華大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TG221

【參考文獻】

相關期刊論文 前10條

1 王瑾;趙亮;;綠色鑄造理念下有機酯水玻璃砂造型常見問題及其應對措施[J];鑄造技術;2016年04期

2 朱世根;陶李洋;駱yN嵐;丁浩;;云溪環保型砂鑄造性能的研究[J];機械工程學報;2016年06期

3 閆新飛;李少雨;馬文治;張旭鵬;;砂型鑄造用型砂熱物性參數的研究[J];鑄造;2015年11期

4 李日;馮傳寧;;界面換熱系數和型砂熱物性參數對凝固過程影響程度的比較[J];鑄造技術;2015年02期

5 張喜;朱世根;駱yN嵐;;水玻璃砂添加劑對潰散性及鑄鋼件粘砂缺陷的影響[J];鑄造;2015年02期

6 王瑾;趙亮;;樹脂砂生產鑄件的主要缺陷分析及預防措施[J];鑄造技術;2014年11期

7 樊自田;龍威;劉富初;;砂型鑄造的環境特征及鑄造粘結劑的發展趨勢[J];湖北工業大學學報;2014年05期

8 樊自田;;從典型砂型鑄造方法的環境特征看鑄造粘結劑的發展趨勢[J];金屬加工(熱加工);2014年09期

9 朱青;朱世根;駱yN嵐;;添加劑對水玻璃砂潰散性及鑄鐵件粘砂缺陷的影響[J];鑄造;2014年04期

10 萬鵬;李遠才;凌宏江;王文清;支合一;薛江;;型砂高溫性能檢測方法及其儀器的現狀和發展[J];鑄造設備與工藝;2014年01期

相關碩士學位論文 前1條

1 荊海鷗;高溫焙燒對鑄造用石英砂工藝性能的影響[D];西安理工大學;2004年

，

本文編號：1847989