發布時間：2019-05-10 06:33

【摘要】：針對碳化硅(SiC)金屬氧化物半導體場效應晶體管(MOSFET)在100 kHz低頻(LF)功放應用中出現的串?dāng)_問題,考慮SiC MOSFET寄生參數分階段研究串?dāng)_過程,分析關鍵參數對串?dāng)_電壓尖峰的影響,從而提出降低串?dāng)_尖峰的若干思路。為抑制串?dāng)_現象,采用無源抑制方法進行驅動設計,該驅動設計簡單可靠,具有較高工程應用價值。最后,進行驅動對比實驗,采用所提驅動設計對串?dāng)_的抑制效果顯著,正、負向串?dāng)_電壓尖峰比基本驅動電路分別降低73%和70%。
[Abstract]:Aiming at the crosstalk problem of MOSFET in 100kHz low-frequency(LF)power amplifier application, SiCMOSFET parasitic parameters are considered to study the crosstalk process in stages, analyze the influence of key parameters on crosstalk voltage spikes, and some ideas are put forward. In order to suppress crosstalk phenomenon, passive suppression method is adopted for driving design. The drive design is simple and reliable and has high engineering application value. Finally錛，

本文編號：2473417