【摘要】：隨著先進制造技術的快速發展,實現耳機端子地自動化焊接已成為一個必然的趨勢。焊錫機器人在工程實踐中能夠極大地改善人們的工作環境、提高焊接效率、節約企業成本、增加企業的競爭力,本文以市場為導向,綜合結構設計和電控設計研發制造出耳機端子自動焊錫機物理樣機,并基于A(yíng)nsys仿真技術及正交試驗,確定了耳機端子自動焊接的焊接工藝及焊接參數。首先,基于耳機端子自動焊錫機的功能要求和技術指標,分析了加工工序、基本流程及設計難點,確定了總體設計方案。其次,根據耳機端子、漆包線的結構特點,進行了焊錫機的詳細方案設計。通過對關鍵部分的計算、分析、可靠性試驗等方法確定各個模塊的設計方案,主要包括振動送料模塊、旋轉識別模塊、自動焊接模塊、焊接線前處理模塊等,從而完成整機模型的設計,并最終完成物理樣機的制備。再次,將松下PLC和海泰克人機交互界面(觸摸屏)相結合,開發出高效、高精度、穩定性好的自動控制系統,能夠滿足耳機端子自動焊接的控制要求。最后,通過將簡化模型導入仿真分析軟件Ansys中,對關鍵部分進行模擬仿真,為焊接過程中關鍵參數的確定提供指導;在仿真基礎之上,通過正交試驗確定耳機端子自動焊接的關鍵參數。本文針對耳機端子開發的自動焊錫機,實現了國內該類焊接設備從無到有的突破。該產品將有利于解決人工焊錫中所存在的產品一致性差、人力成本高、生產效率低等問題,并為針對類似于耳機端子的異形圓柱端子的自動化焊接設備的開發和焊接工藝的研究提供參考和指導。
[Abstract]:With the rapid development of advanced manufacturing technology, automatic welding of headphone terminals has become an inevitable trend. Solder robot can greatly improve people's working environment, improve welding efficiency, save enterprise cost and increase the competitiveness of enterprises in engineering practice. The physical prototype of the automatic soldering machine for headphone terminals was developed by integrating structural design and electronic control design. Based on the Ansys simulation technology and orthogonal test, the welding process and welding parameters of the automatic soldering of headphone terminals were determined. Firstly, based on the functional requirements and technical specifications of the automatic soldering machine for headphone terminals, the processing procedure, basic flow and design difficulties are analyzed, and the overall design scheme is determined. Secondly, according to the structure characteristics of earphone terminal and enamel wire, the detailed scheme design of soldering machine is carried out. Through the calculation, analysis and reliability test of the key parts, the design scheme of each module is determined, including vibration feeding module, rotation identification module, automatic welding module, welding line pre-processing module and so on. Thus, the design of the whole machine model and the final preparation of the physical prototype are completed. Thirdly, an automatic control system with high efficiency, high precision and good stability is developed by combining Panasonic PLC with Hetak human-computer interface (touch screen), which can meet the requirements of automatic welding of headphone terminals. Finally, the simplified model is introduced into the simulation analysis software Ansys, and the key parts are simulated and simulated to provide guidance for the determination of the key parameters in the welding process. The key parameters of automatic welding of earphone terminal are determined by orthogonal test. Based on the automatic soldering machine developed by headphone terminal, this paper has realized the breakthrough of this kind of welding equipment from nothing to existence in our country. This product will help to solve the problems of poor product consistency, high labor cost and low production efficiency in manual soldering. It also provides reference and guidance for the development of automatic welding equipment and welding technology for special-shaped cylindrical terminals similar to earphone terminals.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN642

【參考文獻】

相關期刊論文 前3條

1 黃政艷;;焊接技術與裝備在汽車行業的應用及發展趨勢[J];裝備制造技術;2011年04期

2 陳海明,胡新華,楊繼隆,姜偉;共振式電磁激振器振動系統的仿真分析[J];機床與液壓;2004年07期

3 杜志俊;工業機器人的應用將越來越廣泛[J];機電國際市場;2002年Z1期

相關碩士學位論文 前1條

1 李新霞;一維晶格體系熱傳導的研究[D];湘潭大學;2006年

，

本文編號：2264463