【摘要】：隨著電子技術和數字信號處理技術的發展，音頻功率放大器的發展也進入了一個新的時代，數字功率放大器相對于模擬功放具有高效率、保真度高、功放和揚聲器的匹配好等優點，但目前應用較為廣泛的數字音頻功放為PWM(脈沖寬度調制)功放結構，它在將信號解調的過程中，會產生誤差，，同時信號的輸出波形不夠平滑，噪聲較高，對信號的恢復程度較弱。 針對此類問題，本文采用以DSP為核心設計的數字音頻功率放大器模塊，利用內插算法和調制算法實現1比特激勵信號的輸出，替代傳統的PWM轉化過程。同原有的PWM數字化設計方式相比，本方案可以減小失真，降低噪聲，在高音質輸出方面有較好的設計效果。 本文是對數字音頻大功率放大系統的設計及研究，適用于廣場、會議室等場合，具有對音頻系統及音頻效果需求較高的特點。結合現階段數字功率放大器的相關技術及未來的發展動態，針對課題需求，應用DSP實現數字功放的1比特激勵信號，并配合相應的外圍電路，完成系統的供電、保護等模塊的設計。 結合系統設計需求，選擇一款合適的核心處理器，TI公司的67XX系列DSP以其在數字信號處理上的優勢和先進的芯片性能可以比較容易的實現該設計的主要功能，完成系統中重要的內插和調制模塊，并可以通過其豐富的外設接口完成數據的輸入和輸出。開發過程中利用TI的軟件開發平臺CCS組織DSP系統的軟件結構，并通過CCS觀察和驗證算法在DSP內的實現情況。 論文闡述了系統方案的設計目的及任務，研究了1比特技術的相關算法，完成了各模塊電路的硬件設計及軟件設計，并對音頻輸出信號進行分析，完成系統整體性能測試，最后總結系統設計的總體情況，提出了設計的相關改進工作和項目發展方向。
[Abstract]:With the development of electronic technology and digital signal processing technology, the development of audio power amplifier has entered a new era. Compared with analog power amplifier, digital power amplifier has high efficiency and high fidelity. The power amplifier and loudspeaker match well, but the widely used digital audio power amplifier is PWM (Pulse width Modulation) power amplifier structure, it will produce error in the process of demodulating the signal, and the output waveform of the signal is not smooth enough. The noise is high and the recovery degree of the signal is weak. To solve this problem, a digital audio power amplifier module with DSP as the core is adopted in this paper. The output of 1-bit excitation signal is realized by interpolation algorithm and modulation algorithm, instead of the traditional PWM conversion process. Compared with the original PWM digital design method, this scheme can reduce distortion and noise, and has better design effect in the aspect of high-tone output. This paper is about the design and research of digital audio high-power amplifier system, which is suitable for the situation of square and conference room, and has the characteristics of high demand for audio system and audio effect. Combined with the related technology of digital power amplifier at present and the development trend in the future, according to the demand of the subject, we use DSP to realize the 1-bit excitation signal of digital power amplifier, and cooperate with the corresponding peripheral circuit to complete the power supply of the system. Protection module design. According to the requirement of system design, it is easy to realize the main function of this design by choosing a suitable core processor, 67XX series DSP of TI Company, because of its advantages in digital signal processing and advanced chip performance. The important interpolation and modulation modules in the system are completed, and the data input and output can be completed through its rich peripheral interface. In the process of development, the software structure of DSP system is organized by CCS, a software development platform of TI, and the realization of the algorithm in DSP is observed and verified by CCS. This paper describes the design purpose and task of the system, studies the related algorithms of 1-bit technology, completes the hardware design and software design of each module circuit, and analyzes the audio output signal to complete the overall performance test of the system. Finally, the general situation of the system design is summarized, and the related improvement work and the project development direction are put forward.
【學位授予單位】：哈爾濱理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN722.75

【參考文獻】

相關期刊論文 前10條

1 周浩;曹先國;李家會;;一種高階1 bit插入式∑-Δ調制器的設計[J];半導體技術;2007年02期

2 汪春梅;張崇明;李蕊;朱品昌;;TMS320DM642多媒體處理系統中高性能音頻功能的實現[J];電聲技術;2006年06期

3 倪磊;;D類音頻功率放大器的分析和設計要素[J];電子與封裝;2008年06期

4 王妍;劉帥威;金麗潔;;基于D類放大的高效率音頻功率放大器設計[J];電子設計工程;2011年11期

5 欒彥利;張超英;;DSP與AIC23B通信系統設計[J];廣西輕工業;2007年05期

6 于澤琦;樊養余;史龍飛;呂國云;;一種用于數字D類功放的偽自然采樣算法[J];電子與信息學報;2014年03期

7 盧學燕;;音頻功率放大器設計及實現概述[J];計算機光盤軟件與應用;2014年16期

8 周嵩岑;張金鑫;王肖芬;;基于DSP語音識別系統的硬件設計[J];電子技術;2012年08期

9 董安明;;利用TMS320C6713 DSK實現的自適應濾波器[J];河西學院學報;2010年02期

10 蔣正萍;巫叢平;李壽強;;一種高效率數字音頻功放芯片的設計與實現[J];微電子學;2011年04期

本文編號：2260675