【摘要】：目的論述在產品設計與制造領域,參數化設計與3D打印協同發展的意義和重要性。方法通過參數化設計與傳統設計方法、3D打印與傳統制造方式的比較分析,歸納參數化設計和3D打印的優勢,以及當前其各自發展的局限性。并通過參數化設計與3D打印結合應用的案例,分析二者在產品設計和制造領域的互補性。結論參數化設計擅長的復雜形體設計,恰好可以使3D打印的優勢顯著發揮;同時相較傳統制造方式,3D打印也可以幫助參數化設計的復雜形體付諸實物生產。參數化設計與3D打印互為裨益和助力,其在產品設計與制造領域的協同發展尤為重要。
[Abstract]:Aim to discuss the significance and importance of collaborative development of parametric design and 3D printing in the field of product design and manufacturing. Methods through the comparison and analysis of parametric design and traditional design methods, 3D printing and traditional manufacturing methods, the advantages of parametric design and 3D printing were summarized, as well as the limitations of their respective development at present. The complementarities of parametric design and 3D printing in the field of product design and manufacturing are analyzed. Conclusion Parametric design can make the advantage of 3D printing bring into full play, and 3D printing can also help the parametric design to put the complex object into production. Parameterized design and 3D printing are mutually beneficial and helpful. The collaborative development of parametric design and 3D printing is particularly important in the field of product design and manufacturing.
【作者單位】： 西安美術學院;
【分類號】：TB472;TP391.73

【相似文獻】

相關期刊論文 前10條

1 范志剛,陳宇平,吳明,張鈺;基于標準為約束的參數化設計[J];電子機械工程;2005年05期

2 鐘亮,王曉冬,巴德純;渦輪分子泵參數化設計軟件[J];真空;2004年02期

3 駱小勇;王勇;;獨立密封件及模具的參數化設計[J];潤滑與密封;2007年07期

4 李一民;;一種多功能氣動抱夾裝置的參數化設計及運動仿真研究[J];包裝工程;2009年10期

5 王利民;;全自動塑杯灌裝封口機模塊化參數化設計技術研究[J];機電工程技術;2010年07期

6 吳睿,劉華明,李剛;基于工程約束的參數化設計技術研究[J];機械科學與技術;2000年04期

7 王男;王佩國;;參數化設計在產品造型設計中的應用研究[J];設計;2014年07期

8 劉小靜;常規紙盒二維平面圖及三維立體圖參數化設計[J];包裝工程;2004年05期

9 張艷;;瓦楞輥CAD系統的開發與研究[J];包裝與食品機械;2007年02期

10 和克智;帥哲;;周轉箱CAD系統的研究與實現[J];包裝工程;2007年12期

相關碩士學位論文 前3條

1 趙燁;通用的中小型立式液壓泵站的參數化設計研究[D];鄭州大學;2015年

2 張艷;瓦楞輥參數化設計及其CAD系統的研究與開發[D];西安理工大學;2005年

3 陳金華;機械系統的人機工程設計與參數化設計[D];南京理工大學;2002年

，

本文編號：2373277