發布時間：2018-01-03 19:27

  本文關鍵詞：大相對口徑長焦距折射式光學系統設計　出處：《紅外與激光工程》2014年09期 　論文類型：期刊論文

  更多相關文章： 光學設計 折射系統 二級光譜

【摘要】：分析了大相對孔徑、長焦距折射式光學系統的像差特點,針對一款口徑300mm,焦距540mm,波段范圍500~850 nm,視場角2°的折射式成像物鏡進行了設計。首先根據系統的像差特點,針對二級光譜,選擇了Petzval型作為初始結構,并進行了復雜化,形成大空氣間隔的三組元形式,利于像差的校正和后組元件尺寸的減小;而后針對使用波段對玻璃材料的部分色散P和阿貝數V值進行了修正,并繪制了P-V圖,從中選擇了具有一定二級光譜校正能力并性能優良的玻璃材料。最終系統的二級光譜達到了0.06 mm,表明具有較好的復消色差性能。設計結果系統在相機Nyquist頻率(39 lp/mm)處各視場MTF大于0.8,80%能量集中在直徑為8μm的圓內,小于一個象元尺寸,最大畸變小于0.1%,各項指標均滿足設計要求。
[Abstract]:Analysis of the large relative aperture, the aberration characteristics of long focal length lens system, aiming at a focal length of 540mm, diameter 300mm, the wavelength range of 500~850 nm, a view angle of 2 degrees of refractive lens are designed. According to the aberration characteristics of the system, according to the two spectra, Petzval was selected as the initial structure and type. The complex, three element form large air gap, to reduce the aberration correction and components size; then use band glass materials for partial dispersion P and Abbe number V value was corrected, and the P-V graph, choose from the two level has certain spectral correction capability and the glass material with good performance. The final system of two order spectrum at 0.06 mm, showed that apochromatism has better performance. The design results of system frequency in Nyquist camera (39 lp/mm) at the field of MTF is greater than 0.8,80% energy concentration In a circle with a diameter of 8 mu m, it is less than one image element size and the maximum distortion is less than 0.1%. All the indexes meet the design requirements.

【作者單位】： 中國科學院長春光學精密機械與物理研究所;
【基金】：中國科學院第三期創新工程資助項目
【分類號】：TH74
【正文快照】： 0引言在許多應用領域中,為了獲得高的分辨率和靶面照度,光學成像系統要求具有大的相對孔徑和長的焦距,另外由于CCD探測器件的光譜響應范圍寬,因此,還要求光學系統同時具有寬的光譜范圍,這些要求提高了光學設計的難度。在光學系統結構形式選擇上,由于反射系統元件口徑可達米級

【參考文獻】

相關期刊論文 前4條

1 姜會林;關于二級光譜問題的探討[J];光學學報;1982年03期

2 楊慶華;趙葆常;周仁魁;;基于正常色散玻璃二級光譜的校正[J];光子學報;2008年04期

3 孫鑫;白加光;王忠厚;白清蘭;黃e，

本文編號：1375269