本文選題：構造煤 + 測井曲線��； 參考：《地球物理學進展》2017年03期

【摘要】：構造煤發育是發生煤與瓦斯突出的必要條件,常規構造煤識別方法存在效率低和準確率低等缺點.本文以蘆嶺煤礦Ⅱ六采區8煤層為研究目標,利用不同結構類型煤體的測井響應特征不同的特點,識別煤層中不同結構類型煤體.為了提高識別準確性,利用小波多尺度分析方法提取測井曲線中的低頻分量和中頻分量;再以低頻分量和中頻分量為輸入,利用聚類分析法劃分不同結構類型的煤體.通過識別,可以明顯區分出目標層的原生煤、碎裂煤、碎粒煤和糜棱煤等四種結構類型煤體,同時也可以識別出煤層中的夾矸.以研究區中多鉆孔識別的煤體類型為基礎,繪制煤體結構三元相圖,并將研究區劃分為Ⅰ、Ⅱ、Ⅲ和Ⅳ等四類煤體結構組合類型區塊.其中,Ⅲ類組合區塊中構造煤最為發育,是煤與瓦斯突出的重點防治區.
[Abstract]:The development of tectonic coal is a necessary condition for coal and gas outburst, and the conventional structural coal recognition method has the disadvantages of low efficiency and low accuracy. In this paper, the target of this study is 8 coal seams in No. 2 sixth mining area of Luling Coal Mine. Different structural types of coal bodies are identified by using the different characteristics of logging response of different structural types of coal bodies. In order to improve the accuracy of identification, wavelet multiscale analysis method is used to extract the low frequency component and intermediate frequency component in the log curve, and then the low frequency component and the intermediate frequency component are used as input, and the cluster analysis method is used to divide the coal bodies of different structure types. Through the recognition, the coal bodies of primary coal, broken coal and mylonian coal can be distinguished obviously, and the gangue in coal seam can also be identified at the same time. Based on the type of coal body identified by multiple boreholes in the study area, the ternary phase diagram of coal body structure is drawn, and the study area is divided into four types of coal structure combination blocks: 鈪，

本文編號：1911287