本文選題：水平井 + 分段壓裂　； 參考：《東北石油大學》2015年碩士論文

【摘要】：近年來隨著油田采收率的下降,老齡油田采出原油含水率高達95%,甚至更高,整體的采油效能低下。對老油井的改造增產已成為現階段油田的主要研究應用方向,而壓裂改造作為油氣井的主要改造措施,是國內外的主要研究方向。美國約40%的油井和70%的新氣井是經改造壓裂后增產的。而我國的壓裂技術也在逐漸應用于多個石油開采地區。由于我國大部分地區的油田屬于低滲透地質構造,裂縫在起裂過程中位置與擴展方向難以控制,直接影響著壓裂的成功率。水力噴砂壓裂技術對非均質、連通性差、低滲透等油氣藏效果明顯。水力噴砂壓裂技術正在世界范圍內得到發展和應用。本文在對水平井開采技術,特別是水平井噴砂壓裂技術的國內外發展現狀進行總結的基礎上,結合分段壓裂的特點,對水力噴砂射孔和水力噴砂壓裂的機理進行研究,為施工中井下工具的設計與選型、施工液體和施工管柱結構的優化奠定了理論基礎。設計了新型的錐形噴嘴式水力噴砂射孔工具,并結合冀中油田滲透性差,產液量低的特點,對施工液體體系、磨料及支撐劑等進行優化選配,對壓裂管柱及其施工操作流程進行了優化設計。在我國華北油田地區進行水平井分段噴砂壓裂增產實驗,并對實驗結果進行了系統分析,為水平井分段噴砂壓裂技術的應用提供了現場實驗數據及效果總結,有利于該技術的推廣應用,有利于推動低滲透油田的高效、持續發展。
[Abstract]:In recent years, with the decline of oil recovery, the water cut of crude oil produced in aging oilfield is as high as 95% or higher, and the overall oil recovery efficiency is low. Revamping and increasing production of old oil wells has become the main research and application direction of oil fields at present, and fracturing as the main measures of oil and gas wells is the main research direction at home and abroad. About 40% of American wells and 70% of new gas wells are produced after fracturing. Fracturing technology in China is also gradually applied in many oil extraction areas. Because the oil fields in most areas of China belong to low permeability geological structure, it is difficult to control the position and spreading direction of fracture in the process of fracture initiation, which directly affects the success rate of fracturing. Hydraulic sand blasting fracturing technology has obvious effect on heterogeneous, poor connectivity and low permeability oil and gas reservoirs. Hydraulic sand blasting fracturing technology is being developed and applied all over the world. On the basis of summing up the development of horizontal well production technology, especially horizontal well sand blasting fracturing technology at home and abroad, combined with the characteristics of fracturing, this paper studies the mechanism of hydraulic sand blasting perforation and hydraulic sand blasting fracturing. It lays a theoretical foundation for the design and selection of downhole tools and optimization of construction liquid and construction pipe string structure. A new type of conical nozzle hydraulic sand blasting perforating tool is designed. Combined with the characteristics of poor permeability and low liquid production in Jizhong Oilfield, the construction liquid system, abrasive and proppant are optimized. The optimum design of fracturing string and its operation flow is carried out. The experiment of sand blasting fracturing in horizontal wells is carried out in Huabei Oilfield area of China, and the experimental results are systematically analyzed, which provides the field experimental data and effect summary for the application of the fracturing technology in horizontal wells. It is beneficial to the popularization and application of this technology and to the promotion of high efficiency and sustainable development of low permeability oilfields.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE357

【參考文獻】

相關期刊論文 前1條

1 周權;;連續油管水力噴射逐層壓裂技術首次在國內獲得重大突破[J];鉆采工藝;2007年06期

，

本文編號：1904296