發布時間：2018-05-17 14:36

  本文選題：油田注水管網 + 環枝結合��； 參考：《給水排水》2017年S1期

【摘要】：油田注水管網的水力計算分析對管網改造、擴建,校核管網各節點壓力數值、管段流量分配情況、管道摩阻系數,進行能耗分析,確保管網系統正常運行具有重要的意義。根據某采油廠環枝狀注水管網的特點,采用節點法原理,建立了環枝狀管網水力計算模型,并提出了改進的邊界條件處理方法,此模型具有較強適應性,能滿足環狀、枝狀以及環枝狀管網不同邊界條件下的水力計算需求,且計算速度快。根據此模型編制水力計算仿真軟件并應用于某采油廠注水管網,與現場實際數據對比后得出配水間壓力計算平均誤差為2.98%,注水站流量計算平均誤差為3.32%,計算結果表明該模型能滿足工程需要。
[Abstract]:Hydraulic calculation and analysis of oil field water injection pipe network is of great significance to network reconstruction, expansion, check pipe network node pressure value, pipe flow distribution, pipe friction coefficient, energy consumption analysis, to ensure the normal operation of the pipe network system. According to the characteristics of ring branch water injection pipe network in a certain oil production plant, the hydraulic calculation model of ring branch pipe network is established by using the principle of node method, and the improved boundary condition treatment method is put forward. The model has strong adaptability and can satisfy the annular shape. Under different boundary conditions, the demand for hydraulic calculation of branched and annular branch pipe networks is fast. According to this model, the hydraulic simulation software is compiled and applied to the water injection pipe network of a certain oil production plant. Compared with the actual data, the average error of pressure calculation is 2.98 and the average error of flow calculation of water injection station is 3.32. The calculation results show that the model can meet the engineering needs.
【作者單位】： 中國石油大學(北京)油氣管道輸送安全國家工程實驗室/城市油氣輸配技術北京市重點實驗室;大慶油田第六采油廠;
【分類號】：TE934.1;TV134
，

本文編號：1901762