發布時間：2018-06-09 01:46

  本文選題：實時系統 + 通信機制��； 參考：《國防科學技術大學》2013年博士論文

【摘要】：近年來,嵌入式實時系統的應用已經廣泛滲透到家電、工業控制、汽車、火車、航空航天等各個行業。一方面,許多原來由機械和液壓完成的功能逐步被電子系統取代,各種控制系統電氣化程度不斷提高,另一方面,人們對系統的安全性、舒適性等功能和性能的要求越來越高。這些變化要求實時系統提供更加強大的計算能力,因此,實時系統的處理器向多核方向發展,且處理器的數量急劇增長。這就對實時系統的通信機制提出了越來越嚴苛的要求。本文對實時系統通信機制進行了探索和研究,并對多核任務間通信機制和實時通信網絡進行了設計和優化,主要研究?jī)?nèi)容包括以下四個方面:(1)多核嵌入式實時系統任務間通信機制研究在實時系統中,任務在訪問共享變量時,需要采用通信機制來保證訪問的互斥性。多核體系結構本身具有高性能、低功耗等多種優勢,其在實時系統領域的應用越來越廣泛。由于多核結構的分布式特性,通信機制的設計變得更加復雜。目前,針對多核結構的通信機制主要包括鎖機制和無等待機制兩大類,然而,這兩類機制在存儲開銷和系統可調度性方面各有優劣,無法兼顧兩個指標。本文提出了一種新穎的彈性多處理器通信機制(FMCS),該機制通過一種我們提出的啟發式優化算法為每個共享變量分配其最適用的通信策略和沖突處理策略,具有存儲開銷低和系統可調度性好的優勢。FMCS機制給出了每個任務在最壞情況下的響應時間計算公式,從而能夠?qū)��?shí)時系統進行確定性的時間分析。通過實驗驗證,結果表明:FMCS能夠在保證系統可調度性的前提下大幅度降低存儲開銷,且當系統利用率達到90%以上時,使用FMCS機制仍能保證系統可調度,因而FMCS具有較高的可擴展性。(2)實時通信網絡的消息部署研究實時系統用于實現控制任務時,控制路徑的延遲大小對控制精度影響重大,因此,要達到較高的控制精度就必須將實時系統控制路徑的延遲控制在一定范圍內。在基于模型的開發中,系統的延遲屬性可通過對功能模型進行仿真和模型檢驗來提前驗證。為了確保最終部署的系統仍保持系統需要的屬性,在任務和通信消息實現時需要保證模型的延遲屬性不變。但是,在某些情況下,完全保證模型的延遲屬性不變是不可能做到的,此時,需要在模型中增加通信延遲,并重新修改模型,進行迭代設計。消息部署的延遲在模型延遲屬性中占據相當大的比重,然而,目前對于基于模型開發過程中的消息部署問題的研究還十分缺乏。本文建立了一種新穎的低延遲消息部署模型(LLMD),該模型是一種基于時間觸發通信機制Flex Ray調度問題的數學模型,能夠在保證普通路徑的延遲時限和系統的可調度性的前提下,在關鍵控制路徑中引入盡可能少的單位延遲。最后,本文利用一個X-by-wire實例和一個主動安全實例對該模型進行了實驗驗證,結果表明:該模型能夠在有限時間內找到消息部署優化方案,且該方案在滿足系統可調度性的前提下會盡可能少的引入額外延遲。(3)實時通信網絡安全機制研究隨著航空電子、汽車電子等系統中聯網設備的增加和電氣化程度的提高,系統的可訪問性急劇上升,這導致實時通信網絡面臨一系列嚴重的安全隱患。本文提出了SSS機制——一種用于實時通信網絡的智能安全機制,該安全機制能夠有效抵御偽造和篡改攻擊,大大提高了通信系統的安全性,并允許在負載較輕的處理器上以軟件方式代替原本由硬件實現的安全相關操作(簽名、認證、密鑰生成等),能夠顯著降低硬件開銷。本文提出了SSS機制的優化設計模型,該模型在保證通信安全性和系統可調度性的前提下,合理安排消息、密鑰和任務的調度,盡可能少的引入硬件單元,顯著降低了實現成本;該模型提供多種安全級別,支持設計人員根據通信系統負載選擇最佳安全級別。最后,我們使用兩個工業實例對提出的SSS機制進行了實驗驗證,結果發現:SSS機制能夠在有限的時間內找到優化方案,且與現有的Flex Ray安全機制相比,能夠大大降低硬件開銷。(4)實時通信網絡的可擴展性研究隨著嵌入式系統功能的不斷增加和性能的迅速提高,實時系統中的任務越來越多,任務間的通信數據急劇增加,從而對通信網絡的可擴展性提出了更高的要求。本文提出了一種高可擴展實時通信網絡結構HSRN。HSRN通過在Flex Ray通信系統中引入交換機將通信系統分割成多個分支(branch),有效隔離了廣播域,從而大大提高了通信系統的可擴展性。HSRN中的交換機采用了一種我們?cè)O(shè)計的消息可緩存交換結構,該交換結構允許跨分支通信消息在發送端和接收端的不同位置時間槽上傳輸,且即使出現兩個分支的消息同時發向一個目標分支的沖突情況,也可通過輸入端的緩沖隊列來解決沖突,從而放松了調度約束,允許通信網絡容納更多的消息,提高了網絡利用率。為了提高HSRN中各分支負載的均衡性,本文提出了一種負載均衡優化算法,該算法能夠在有限時間內找到最為合理的網絡分割方案,使得最大負載分支使用盡可能少的時間槽,從而保證了HSRN各分支的負載均衡,提高了實時通信網絡的可擴展性。本文通過X-by-wire案例和一個合成案例對HSRN進行了實驗驗證,結果表明:HSRN能夠在時間槽使用總數、負載均衡和交換結構最小緩存配置之間進行很好的優化,在滿足網絡容量的同時兼顧了負載均衡,從而具有非常高的可擴展性。綜上,本文對實時系統通信機制的若干問題進行了研究,從不同角度對通信機制進行了設計和優化,提出了一系列的模型和優化設計方法,對推動實時系統通信機制的發展做出了積極的貢獻,具有一定的理論意義和應用價值。
[Abstract]:In recent years, the application of embedded real-time system has been widely permeated into various industries, such as household appliances, industrial control, automobile, train, aerospace and other industries. On the one hand, many functions completed by machinery and hydraulics are gradually replaced by electronic systems, and the degree of electrification of various control systems is constantly improved. On the other hand, people are safe and comfortable for the system. The requirements of sexual function and performance are becoming higher and higher. These changes require the real-time system to provide more powerful computing power. Therefore, the processor of the real-time system develops to the multi core direction, and the number of processors is increasing rapidly. This makes the communication mechanism of real-time systems more and more stringent. This paper is a communication mechanism for real-time systems. The research and research are carried out, and the communication mechanism and real-time communication network between multi core tasks are designed and optimized. The main research contents include the following four aspects: (1) the inter task communication mechanism of multi core embedded real-time systems is studied in the real-time system. The communication mechanism is needed to ensure the mutual access when the task is access to the shared variables. The multi-core architecture itself has many advantages, such as high performance, low power consumption and so on. It has become more and more widely used in the field of real-time system. Because of the distributed characteristics of multi-core structure, the design of communication mechanism becomes more complex. At present, the communication mechanism for multi-core structure includes two main categories, lock mechanism and no wait mechanism, however, this The two types of mechanisms have advantages and disadvantages in storage overhead and system schedulability. This paper proposes a novel flexible multi processor communication mechanism (FMCS). This mechanism uses a heuristic optimization algorithm proposed by us to allocate the most applicable communication strategy and conflict processing strategy for each shared variable. The.FMCS mechanism with low storage cost and good system schedulability gives the response time calculation formula for each task in the worst case, and can make deterministic time analysis of the real-time system. The results show that FMCS can greatly reduce the storage cost under the premise of guaranteeing the system adjustable, and when the system is adjustable, the storage cost can be greatly reduced. When the system utilization ratio is above 90%, the system can still ensure the schedulability of the system using the FMCS mechanism, so FMCS has high scalability. (2) a real-time communication network message deployment research real-time system is used to realize the control task, the delay size of the control path plays a significant role in the control precision. Therefore, the higher control precision must be achieved. The delay property of the system is controlled in a certain range. In the model based development, the delay properties of the system can be verified ahead of time by simulation and model test of the function model. In order to ensure that the final deployed system still maintains the required properties of the system, the model is guaranteed to be extended when the task and communication message are implemented. However, in some cases, it is impossible to completely guarantee the delay attribute of the model. At this time, it is necessary to add communication delay in the model and revise the model for iterative design. The delay of message deployment is a large proportion of the model delay attributes. However, the current model is developed for the model based on the model. A new low delay message deployment model (LLMD) is established in this paper. This model is a mathematical model based on the scheduling problem of Flex Ray based on time triggered communication mechanism. It can control the key control path on the premise of guaranteeing the delay time limit and the schedulability of the common path. In the path, the minimum unit delay is introduced. Finally, a X-by-wire example and an active security example are used to verify the model. The results show that the model can find the optimal scheme of message deployment in a limited time, and the scheme will be introduced as little as possible to meet the schedulability of the system. (3) (3) the research on the security mechanism of real time communication network, with the increase of networking equipment and the increase of electrification in the avionics, automotive electronics and other systems, the accessibility of the system has risen sharply, which leads to a series of serious security risks in the real time communication network. This paper proposes a SSS mechanism, a kind of real-time communication network. The mechanism of intelligent security, which can effectively resist forgery and tampering attacks, greatly improves the security of the communication system, and allows software to replace the security related operations (signature, authentication, key generation, etc.) which are originally implemented by hardware in a lighter load processor, and can significantly reduce the hardware overhead. This paper proposes a SSS On the premise of guaranteeing communication security and system schedulability, the model can reasonably arrange the message, key and task scheduling under the premise of ensuring communication security and system schedulability, and reduce the cost of implementation as little as possible. This model provides a variety of security levels and supports designers to select the best security level according to the communication system load. Finally, we use two industrial examples to verify the proposed SSS mechanism. The results show that the SSS mechanism can find the optimization scheme in a limited time, and can greatly reduce the hardware overhead compared with the existing Flex Ray security mechanism. (4) the scalability of the real-time communication network is based on the function of the embedded system. Increasing and rapidly increasing performance, more and more tasks in real time systems, the rapid increase of communication data between tasks, and higher requirements for the scalability of communication networks. A high scalable real-time communication network structure, HSRN.HSRN, is introduced in this paper by introducing a switch in the Flex Ray communication system. The system is divided into multiple branches (Branch), effectively isolating the broadcast domain, thus greatly improving the scalability of the communication system's extensibility.HSRN using a message caching switch we design, which allows transmissions of cross branch communication messages to be transmitted at different locations in the sender and receiving end, even if it appears. The messages of the two branches are simultaneously sent to the conflict of a target branch and can be solved by the buffer queue of the input terminal. Thus, the scheduling constraints are relaxed, the communication network is allowed to accommodate more messages and the network utilization is improved. In order to improve the equilibrium of the branch loads in HSRN, a load balancing optimization is proposed in this paper. The algorithm can find the most reasonable network segmentation scheme in the limited time, which makes the maximum load branch use as little time slot as possible, thus ensuring the load balance of each branch of HSRN and improving the scalability of the real-time communication network. In this paper, a X-by-wire case and a synthetic case are used to verify the HSRN. The results show that HSRN can be well optimized between the total amount of time slot, load balance and the minimum buffer configuration of the switching structure. It can satisfy the network capacity while balancing the load, thus having very high scalability. In this paper, several problems of the real-time system communication mechanism are studied in this paper, from different angles. The communication mechanism is designed and optimized, and a series of models and optimal design methods are put forward. It has made a positive contribution to the development of the real-time system communication mechanism, and has certain theoretical significance and application value.
【學位授予單位】：國防科學技術大學
【學位級別】：博士
【學位授予年份】：2013
【分類號】：TP332

【相似文獻】

相關期刊論文 前10條

1 王為;;嵌入式實時系統在通信系統中的應用[J];中國科技信息;2006年02期

2 王濤 ,張偉良 ,葛寧 ,馮重熙;嵌入式實時系統及其在通信系統中的應用[J];電子技術應用;2001年11期

3 王娟;嵌入式實時系統的研究[J];哈爾濱師范大學自然科學學報;2003年03期

4 程臻 ,郝智泉 ,舒玉華;嵌入式實時系統中跨平臺通信的實現[J];電子設計應用;2003年04期

5 丁偉雄,宋曉光,楊定安;嵌入式實時系統中跨平臺通信的實現[J];實驗室研究與探索;2005年10期

6 楊林;;淺談嵌入式實時系統開發與研究[J];大眾文藝(理論);2008年10期

7 曹小峰;楊文強;;一種面向嵌入式實時系統的安全策略優化生成方法[J];計算機工程與科學;2010年12期

8 古天龍,蔡國永,龐建雄;嵌入式實時系統及其相關問題[J];電子科技導報;1997年12期

9 張宏海,李成忠,陳祝亞;嵌入式實時系統[J];安徽工業大學學報(自然科學版);2003年01期

10 李勇華;毋國慶;;嵌入式實時系統的原型化方法研究[J];計算機工程與應用;2006年11期

相關會議論文 前4條

1 沈國華;沈桂芬;;嵌入式實時系統中程序的優化設計[A];全國冶金自動化信息網年會論文集[C];2004年

2 沈國華;沈桂芬;;嵌入式實時系統中程序的優化設計[A];冶金自動化信息網年會論文集[C];2004年

3 羅逸葦;張立強;王斌修;;用嵌入式實時系統構建電加工智能電源[A];第十屆全國特種加工學術會議論文集[C];2003年

4 呂為工;馬英;;一種基于DVS的任務級嵌入式實時系統調度方法[A];山東省計算機學會2005年信息技術與信息化研討會論文集（二）[C];2005年

相關博士學位論文 前4條

1 韓崗;嵌入式實時系統通信機制與優化技術研究[D];國防科學技術大學;2013年

2 謝曉娜;嵌入式實時系統節能和可靠性優化算法研究[D];電子科技大學;2014年

3 毛佳;嵌入式實時系統中關鍵技術的研究[D];吉林大學;2004年

4 王保進;嵌入式實時系統的任務調度與資源共享模型及算法研究[D];中國人民解放軍信息工程大學;2005年

相關碩士學位論文 前10條

1 王帥華;基于ARM的嵌入式實時系統關鍵技術的研究[D];中國科學院研究生院（沈陽計算技術研究所）;2015年

2 黃鑫;基于動態電壓調節的多核嵌入式實時系統的節能調度研究[D];湖南大學;2010年

3 王璽;嵌入式實時系統的低能耗研究[D];西安電子科技大學;2011年

4 張銳;嵌入式實時系統的節能式任務管理[D];華中科技大學;2006年

5 馬躍;面向嵌入式實時系統的動態安全管理機制研究[D];電子科技大學;2013年

6 吳文峰;嵌入式實時系統動態內存分配管理器的設計與實現[D];重慶大學;2013年

7 李曉斐;嵌入式實時系統優盤啟動技術的設計與實現[D];天津大學;2009年

8 王_g;嵌入式實時系統的網絡通訊及應用[D];大連理工大學;2004年

9 凌云卿;基于Linux的嵌入式實時系統的研究與實現[D];華中科技大學;2012年

10 楊陽;基于AADL的車用嵌入式實時系統建模方法研究[D];湖南大學;2012年

，

本文編號：1998242