【摘要】：工廠供配電系統,是指將上級電力系統的輸入電壓等級降低后，再將電能按需分配到各個工廠廠房或者生產車間的最終用電設備上，使用電設備能夠正常運轉，從而進行正常的生產活動。一般情況下供配電系統是由總降壓變電站、中壓配電站、中壓配電線路、低壓電力室、低壓配電線路、現場用電設備等幾部分組成。工廠總降壓變電站及以下各級配電系統的設計，是根據各個生產車間的負荷容量和性質，工藝流程上的用電負荷分布等各方面因素綜合考慮，并在結合國家整體供電情況的大形勢下，實現電能安全、可靠、經濟的分配。 新型干法水泥生產線的供配電設計就是這樣一個典型的例子。本文以新疆伊犁塔斯水泥生產線項目為例，在負荷計算及無功功率補償，諧波治理，總降變電站方案設計，車間配電站方案設計，短路電流計算及繼電保護，電氣設備選型（特別是變壓器的數量、容量的選擇），電纜的選擇等幾個重要方面對工廠供配電設計展開說明。尤其是諧波治理部分的研究，，將研究結果應用到水泥工程實際當中去，得到了較好的效果�？紤]到工業自動化應用的廣泛性及重要性，本文對新型干法水泥生產線自動化控制系統也做了一些簡介。
[Abstract]:The power supply and distribution system in a factory refers to the reduction of the input voltage level of the superior power system and the distribution of electrical energy on demand to the factory buildings or the final electric equipment in the production workshop, and the electrical equipment can operate normally, thus carrying out normal production activities. In general, the distribution system is a total depressurization substation and medium voltage. Distribution station, medium voltage distribution line, low voltage power station, low voltage power distribution line, field electric equipment and so on. The design of the factory general depressurization substation and the following distribution system are considered according to the load capacity and nature of each production workshop, the distribution of power load distribution in the process flow and so on, and in combination with the country. Under the general situation of overall power supply, we can achieve safe, reliable and economic distribution of electric energy.
The design of power supply and distribution of the new dry cement production line is a typical example. This paper takes the Xinjiang Yili tasse cement production line as an example, in load calculation and reactive power compensation, harmonic control, total reduced substation scheme design, workshop distribution station scheme design, short circuit current calculation and relay protection, electrical equipment selection (special) It is the quantity, the selection of the capacity of the transformer, the selection of the capacity of the cable, the selection of the cable and other important aspects to explain the design of the power supply and distribution in the factory, especially the study of the harmonic control part, and apply the research results to the actual cement engineering, and get the better effect. Considering the wide and important importance of the application of the industrial automation, the new type of drying is taken into account. The automation control system of the cement production line is also introduced briefly.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TQ172.6;TM727

【共引文獻】

相關期刊論文 前1條

1 彭超塵;;淺談無功補償及消諧裝置在工廠供電系統中的應用[J];科技資訊;2010年30期

相關碩士學位論文 前1條

1 李長安;小電流接地故障諧波選線可靠性研究[D];山東大學;2007年

本文編號：2147771