光面晶體硅—陷光膜復合的太陽能電池光電特性研究
發布時間：2018-07-23 14:05
【摘要】：太陽能電池是利用半導體材料光生伏特效應來工作的器件,能夠?qū)⑻柟獾哪芰恐苯愚D(zhuǎn)化為電能。近年來,在各國利好政策的支持下,光伏產業發展迅猛。晶體硅電池以其性價比高的優勢在光伏市場一直占據主流地位。圍繞晶體硅電池吸光率及光電轉換效率的提高,本文進行了系列的相關研究。采用化學拋光處理得到光滑的晶體硅表面,去除晶體硅片表面的損傷層,光面晶體硅片所制作的電池具有較高的光生伏特效應,但是光面晶體電池表面的反射損失高達30%左右。目前主要采用制絨工藝獲得絨面結構來減少其表面反射損失,但絨面結構會導致晶體硅高溫擴散不一致、晶格位錯缺陷、接觸電阻增大等不利因素的凸顯,從而削弱晶體硅電池的光生伏特效應。本文研究一種陷光膜復合至光面晶體硅表面,以提高光面晶體硅電池的吸光率,并保持其較高的光生伏特效應,得到了高效率的光面晶體硅-陷光膜復合電池。本文主要從以下幾個方面展開研究:1)分析各種晶體硅的表面制絨方法及其表面結構,研究晶體硅電池表面微結構對其光學性能及光生伏特效應的影響。實驗制作光面晶體硅電池和不同尺寸微結構的絨面晶體硅電池,觀察各種晶體硅電池的表面形貌,并測試其吸光率及轉換效率。撇開吸光率的影響,分析不同表面形貌對晶體硅電池的光生伏特效應的影響規律,通過實驗得到了光面晶體硅電池具有最佳的光生伏特效應。2)分析晶體硅電池絨面結構的陷光原理,根據陷光原理設計陷光膜的表面形貌及結構,通過理論計算及軟件模擬優化陷光膜結構參數。根據晶體硅的折射率及多層膜減反射原理選擇合適的陷光膜材質,研究其加工工藝,制作出陷光膜并測試其表面粗糙度。3)研究層壓復合工藝及膠粘復合工藝,結合陷光膜材質及晶體硅電池,優化光面晶體硅-陷光膜復合電池的結構,構建高效的光面晶體硅-陷光膜復合電池模型。實驗制作光面晶體硅-陷光膜復合電池,實驗分析復合電池的光學和電學特性。通過以上研究,確定出高光生伏特效應的光面晶體硅電池及其制作工藝,設計低反射損失的陷光膜,通過將陷光膜復合至光面晶體硅電池表面,提高光面晶體硅電池的吸光率,從而獲得較高轉換效率的復合電池。獲得的復合電池轉換效率為18.1%,比相同基材的絨面晶體硅電池的轉換效率提升1.6%。
[Abstract]:Solar cells are devices that work by using the photovoltaic effect of semiconductor materials, which can convert solar energy directly into electric energy. In recent years, under the support of favorable policies, photovoltaic industry is developing rapidly. Crystal silicon cells have always occupied the mainstream position in the photovoltaic market because of their high performance-to-price advantage. A series of related studies have been carried out to improve the absorptivity and photoelectric conversion efficiency of crystalline silicon cells. The smooth crystal silicon surface was obtained by chemical polishing, and the damage layer on the crystal silicon surface was removed. The photovoltaic effect of the battery made by the smooth crystal silicon wafer was higher, but the reflection loss of the smooth crystal cell surface was about 30%. In order to reduce the surface reflection loss, the cashmere structure is mainly used to reduce the surface reflection loss. However, the flannel structure will lead to the inconsistency of crystal silicon diffusion at high temperature, the lattice dislocation defect, the increase of contact resistance, and so on. Thus the photogenerated volt effect of crystalline silicon cell is weakened. In order to improve the absorbency and maintain the high photovolt effect, a kind of photovoltaic composite cell with high efficiency has been obtained by using a kind of trapping film composite to the surface silicon surface crystal silicon surface in order to improve the absorbency of the crystal silicon cell and maintain its high photogenerated volt effect. In this paper, we mainly analyze the surface velvet making methods and surface structure of various crystalline silicon from the following aspects: 1) and study the influence of the surface microstructure on the optical properties and photovolt effect of crystalline silicon cells. The smooth crystal silicon cell and the flannel crystal silicon cell with different sizes were fabricated. The surface morphology of various crystal silicon cells were observed and their light absorption and conversion efficiency were measured. The influence of different surface morphology on photogenerated volt effect of crystal silicon cell is analyzed, and the influence of absorption ratio on the photovolt effect is analyzed. The experimental results show that the crystal silicon cell has the best photogenerated volt effect (.2). The surface morphology and structure of the film are designed according to the principle of trapping light. The structural parameters of the trapping film were optimized by theoretical calculation and software simulation. According to the refractive index of crystal silicon and the antireflection principle of multilayer film, the suitable material of the film is selected, the processing technology of the film is studied, the trapping film is made and its surface roughness is measured. (3) the laminated composite process and the adhesive composite technology are studied. The structure of crystal silicon-trapping film composite battery was optimized by combining the material of optical trapping film and crystal silicon cell, and an efficient model of crystal silicon-trap film composite battery was constructed. The optical and electrical properties of the crystal silicon-trapping film composite battery were analyzed experimentally. Through the above research, the high photovoltaic crystal silicon cell and its fabrication process are determined, and the low reflection loss trapping film is designed. By combining the trapping film on the surface of the smooth crystal silicon cell, the absorptivity of the smooth crystal silicon cell is improved. Thus, the composite battery with high conversion efficiency is obtained. The conversion efficiency of the composite battery is 18.1g, which is 1.6 higher than that of the suede crystal silicon cell with the same substrate.
【學位授予單位】：集美大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TM914.4
本文編號：2139648
[Abstract]:Solar cells are devices that work by using the photovoltaic effect of semiconductor materials, which can convert solar energy directly into electric energy. In recent years, under the support of favorable policies, photovoltaic industry is developing rapidly. Crystal silicon cells have always occupied the mainstream position in the photovoltaic market because of their high performance-to-price advantage. A series of related studies have been carried out to improve the absorptivity and photoelectric conversion efficiency of crystalline silicon cells. The smooth crystal silicon surface was obtained by chemical polishing, and the damage layer on the crystal silicon surface was removed. The photovoltaic effect of the battery made by the smooth crystal silicon wafer was higher, but the reflection loss of the smooth crystal cell surface was about 30%. In order to reduce the surface reflection loss, the cashmere structure is mainly used to reduce the surface reflection loss. However, the flannel structure will lead to the inconsistency of crystal silicon diffusion at high temperature, the lattice dislocation defect, the increase of contact resistance, and so on. Thus the photogenerated volt effect of crystalline silicon cell is weakened. In order to improve the absorbency and maintain the high photovolt effect, a kind of photovoltaic composite cell with high efficiency has been obtained by using a kind of trapping film composite to the surface silicon surface crystal silicon surface in order to improve the absorbency of the crystal silicon cell and maintain its high photogenerated volt effect. In this paper, we mainly analyze the surface velvet making methods and surface structure of various crystalline silicon from the following aspects: 1) and study the influence of the surface microstructure on the optical properties and photovolt effect of crystalline silicon cells. The smooth crystal silicon cell and the flannel crystal silicon cell with different sizes were fabricated. The surface morphology of various crystal silicon cells were observed and their light absorption and conversion efficiency were measured. The influence of different surface morphology on photogenerated volt effect of crystal silicon cell is analyzed, and the influence of absorption ratio on the photovolt effect is analyzed. The experimental results show that the crystal silicon cell has the best photogenerated volt effect (.2). The surface morphology and structure of the film are designed according to the principle of trapping light. The structural parameters of the trapping film were optimized by theoretical calculation and software simulation. According to the refractive index of crystal silicon and the antireflection principle of multilayer film, the suitable material of the film is selected, the processing technology of the film is studied, the trapping film is made and its surface roughness is measured. (3) the laminated composite process and the adhesive composite technology are studied. The structure of crystal silicon-trapping film composite battery was optimized by combining the material of optical trapping film and crystal silicon cell, and an efficient model of crystal silicon-trap film composite battery was constructed. The optical and electrical properties of the crystal silicon-trapping film composite battery were analyzed experimentally. Through the above research, the high photovoltaic crystal silicon cell and its fabrication process are determined, and the low reflection loss trapping film is designed. By combining the trapping film on the surface of the smooth crystal silicon cell, the absorptivity of the smooth crystal silicon cell is improved. Thus, the composite battery with high conversion efficiency is obtained. The conversion efficiency of the composite battery is 18.1g, which is 1.6 higher than that of the suede crystal silicon cell with the same substrate.
【學位授予單位】：集美大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TM914.4
【參考文獻】
相關期刊論文 前10條
1 昌金銘;;國內外光伏發電的新進展[J];中國建設動態(陽光能源);2007年01期
2 肖文明;檀柏梅;劉玉嶺;牛新環;邊征;;多晶Si太陽電池表面酸腐蝕制絨的研究[J];微納電子技術;2009年10期
3 余鵬;李偉博;唐舫成;汪加勝;;太陽能電池封裝材料研究進展[J];廣州化工;2011年03期
4 盧輝東;沈宏君;黎磊;剡文杰;;一種增加單結非晶硅薄膜太陽電池光吸收的結構設計[J];光學學報;2013年08期
5 林捷;王如志;蓋紅;王波;嚴輝;;Y_2O_3∶Bi,Yb減反轉光薄膜的制備及其性能研究[J];發光學報;2015年01期
6 郭春林;汪雷;戴準;房劍鋒;鄭佳毅;楊德仁;;快速熱氧化制備超薄二氧化硅層及其鈍化效果[J];材料科學與工程學報;2015年01期
7 王全志;井西利;馬懿恒;邢小寧;王紅翠;;高效硅太陽能電池減反射膜系折射率分布[J];激光與紅外;2011年06期
8 崔佳;曲敏杰;劉偉;李晶;張美玲;;LED環氧樹脂封裝材料研究進展[J];塑料科技;2008年08期
9 陳君 ,楊德仁;財政鼓勵下的光伏市場[J];太陽能;2003年01期
10 周春蘭;王文靜;趙雷;李海玲;刁宏偉;曹曉寧;;單晶硅表面均勻小尺寸金字塔制備及其特性研究[J];物理學報;2010年08期
相關碩士學位論文 前1條
1 李華;中國光伏產業發展戰略研究[D];上海交通大學;2009年
，本文編號：2139648
本文鏈接：http://www.lk138.cn/kejilunwen/dianlilw/2139648.html
最近更新
教材專著
