發布時間：2018-08-04 13:42

【摘要】：納米材料依舊是21世紀的明星材料,納米隔熱材料由于其明顯的低熱導率,一出現就成為艦船行業的研究熱點。與傳統的隔熱材料相比,相同的隔熱面積需要的納米隔熱材料更少。本文以納米孔隔熱材料的制造工藝為例,探索納米隔熱材料的工藝流程,并將納米孔隔熱材料和傳統的隔熱材料的壓縮強度進行對比,對不同溫度下納米孔隔熱材料的加熱線收縮率進行研究。結果發現,納米孔隔熱材料的壓縮強度高于傳統的無機隔熱材料,卻低于硅酸鋁纖維,納米孔隔熱材料的最佳使用溫度為1 000℃左右。
[Abstract]:Nanomaterials are still the star materials in the 21st century. Because of their obvious low thermal conductivity, nanomaterials have become a research hotspot in ship industry. Compared with the traditional insulation materials, the same insulation area requires less nano insulation materials. In this paper, the manufacturing process of nano-porous insulation material is taken as an example to explore the technological process of nano-insulation material, and the compression strength of nano-pore insulation material and traditional heat insulation material is compared. The shrinkage of heating line of nano-pore insulation materials at different temperatures was studied. The results show that the compression strength of nano-porous insulation material is higher than that of traditional inorganic insulating material, but lower than that of aluminum silicate fiber. The optimum temperature of nano-pore insulation material is about 1000 鈩，

本文編號：2164063